{"title":"RPM SXS Kawasaki Teryx H2 Performance Parts","description":"\u003cdiv class=\"r1-collection-copy\"\u003e\n\u003cp class=\"r1-collection-copy__lead\"\u003e\u003cstrong\u003eShop RPM SXS performance parts for the Kawasaki Teryx H2, including intercoolers, exhaust, cooling, carbon-fiber body parts, and forced-induction upgrades.\u003c\/strong\u003e\u003c\/p\u003e\n\u003csection\u003e\u003ch3\u003eMatch the Complete Performance Setup\u003c\/h3\u003e\n\u003cp\u003eVerify model year, engine or turbo configuration, required tuning, fuel, included hardware, hose or fitting size, and compatibility with existing intake, exhaust, clutch, and cooling parts before ordering.\u003c\/p\u003e\u003c\/section\u003e\u003cp\u003e\u003ca href=\"\/collections\/rpm-sxs\"\u003e\u003cstrong\u003eShop all RPM SXS parts\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"kawasaki-teryx-h2-intercooler-fan-override-kit","title":"Kawasaki Teryx H2 Intercooler Fan Override Kit","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Intercooler Fan Override Kit\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch4\u003e\n\u003cstrong\u003eKawasaki H2 4\/5 Seat \u003c\/strong\u003e\u003cstrong\u003eIntercooler fan Override Plug \u0026amp; Play Switch \u0026amp; Harness Kit\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003eThe RPM Kawasaki H2 Fan override kit offers the ability to run the intercooler fans at any time from the flip of a single switch. This fan override kit helps keep fresh air moving across the engine and exhaust as well as drastically lowering operating and air intake temperatures with the engine running OR off and keyed power on. The factory activation thresholds for the fans are still in place. This means if your override toggle is off and the factory fans are activated by the ECU, they will still activate, turn on, and run as normal. \u003c\/div\u003e\n\u003cdiv\u003eOur wiring kits are easy to install, plug \u0026amp; play, and include a blue backlit toggle.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFits H2 4 \u0026amp; 5 seat model H2\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCooler Intake Air Temps \u003c\/li\u003e\n\u003cli\u003eRetains Factory on\/off Thresholds \u003c\/li\u003e\n\u003cli\u003eBlue Backlit Switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/switches\"\u003eUTV Rocker Switches\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580414361902,"sku":"WRK-IR-KA-1","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2IntercoolerOverrideHArnessMain.jpg?v=1790571667"},{"product_id":"kawasaki-teryx-h2-6-8-gallon-auxiliary-fuel-tank","title":"Kawasaki Teryx H2 6.8-Gallon Auxiliary Fuel Tank","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 6.8-Gallon Auxiliary Fuel Tank\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eRPM Kawasaki Teryx H2 6.8 Gallon Auxiliary Fuel Tank\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eMaximize your adventure time with the all-new RPM Kawasaki H2 6.8 Gallon Auxiliary Fuel Tank, purpose-built for the supercharged Kawasaki Teryx H2. This drop-in tank installs cleanly into the factory empty space under the passenger side rear seat, delivering a massive boost in range without sacrificing comfort or performance.\u003c\/p\u003e\n\u003cp\u003eIncludes a precision billet fuel fill adapter that seamlessly converts the OEM Kawasaki fill cap to a durable Kelch click-style cap. A fluorolined silicone hose connects between the factory fill neck and the supplied cap, integrating both the fill tube and breather into the main tank for effortless operation.\u003c\/p\u003e\n\u003cp\u003eInstallation is incredibly simple and completely non-invasive — no cutting, no modifications to the OEM fuel tank, chassis, emissions components, wiring, or battery relocation. All fuel lines route safely away from drivetrain parts, and both seats remain fully functional.\u003c\/p\u003e\n\u003cp\u003eConstructed from rugged 5mm rotomolded plastic, this tank is engineered to withstand the harsh abuse of dunes, trails, and desert running. It ties directly into the factory fill neck for filling and venting, so there’s zero hassle and no annoying fuel fumes in the cab — a common issue with other kits.\u003c\/p\u003e\n\u003cp\u003eEvery RPM kit comes complete with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-flow pump delivering 1.25 GPM (significantly faster than most competitors)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play wiring harness with a convenient momentary switch (prevents accidental pump run time or burnout)\u003c\/li\u003e\n\u003cli\u003eAll necessary fittings, hardware, and clear step-by-step instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSafety remains our top priority.  If you overfill the main tank, excess fuel automatically routes back to the auxiliary tank via the vent line, ride with total peace of mind.\u003c\/p\u003e\n\u003ch3\u003eKey Specs \u0026amp; Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6.8 Gallon Capacity \u003c\/li\u003e\n\u003cli\u003eHeavy-Duty 5mm Rotomolded Construction\u003c\/li\u003e\n\u003cli\u003ePlug-and-Play Wiring Harness with Momentary Switch\u003c\/li\u003e\n\u003cli\u003e1.25 GPM High-Volume Transfer Pump\u003c\/li\u003e\n\u003cli\u003eIncludes All Fittings, Pump, Harness \u0026amp; Hardware\u003c\/li\u003e\n\u003cli\u003eOEM-Style Kelch Locking Gas Cap\u003c\/li\u003e\n\u003cli\u003eFull Seat Functionality Retained\u003c\/li\u003e\n\u003cli\u003eNo Chassis or OEM Tank Modifications Required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot compatible with dual battery setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/fuel\"\u003eFuel\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580415213870,"sku":"FTK-KA-1","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/KawasakiH2FuelTankFrontMain_01e5bd7e-ded7-4bee-b5ed-cf39f15a08ee.jpg?v=1790571691"},{"product_id":"kawasaki-teryx-h2-spark-arrestor-inserts-with-quiet-core","title":"Kawasaki Teryx H2 Spark Arrestor Inserts With Quiet Core","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Spark Arrestor Inserts With Quiet Core\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003ch3\u003eRPM H2 Spark Arrestor Inserts With Quiet Core\u003c\/h3\u003e\n\u003cp\u003eThis USFS approved spark arrestor mesh is wrapped around our standard quiet core insert thus reducing DB's while remaining USFS compliant.\u003c\/p\u003e\n\u003cp\u003eThis kit contains 2 Spark Arrestor inserts that fit RPM style mufflers for the Kawasaki H2. \u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580416360750,"sku":"QTC-KA-1","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/h2exhaustQuietCores.jpg?v=1790571714"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-cold-air-intake","title":"Kawasaki Teryx H2 Carbon Fiber Cold-Air Intake","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Cold-Air Intake\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Kawasaki H2 Carbon Race Intake System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt specifically for the supercharged Kawasaki H2, this is our flagship Carbon Race Intake, engineered for riders and racers who demand maximum airflow, and power.\u003c\/p\u003e\n\n\u003cp\u003eAfter extensive testing and multiple design iterations, we created an intake that eliminates the restrictions found in other aftermarket designs. Our system starts at a full\u003cstrong\u003e \u003c\/strong\u003e4 inches\u003cstrong\u003e \u003c\/strong\u003eand smoothly transitions to the exact factory inlet size while being fully port matched with no restrictions. This creates a seamless, unrestricted path from filter to supercharger. A rubber plug is included to block off the area where the factory intake tube entered the bed, stopping he collection of debris inside the old intake box at the bed. \u003c\/p\u003e\n\u003cp\u003eWe use premium carbon fiber twill weave for both the intake tube and filter guard. WHy We choose Carbon fiber for our cold air intakes! Carbon fiber dissipates heat far better than silicone, reducing intake air temperatures and preventing power robbing heat soak especially important in high boost, hot engine bay environments. Carbon is also extremely strong, won’t collapse under high vacuum, and is far more resistant to punctures from debris compared to silicone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Perform:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe intake guard is not mounted to body panels, a critical detail since those are high impact zones during tip overs. This protects both the guard and the intake itself, But most importantly keeps the air filter itself protected from damage like punctures and tears.\u003c\/li\u003e\n\u003cli\u003eWe use genuine S\u0026amp;B high flow cotton dry filters (cleanable \u0026amp; extendable) paired with our RPM Hydrophobic pre-filter. Mud, sand, and water slide right off, keeping the main filter cleaner longer in real world dune, desert, racing, and trail abuse.\u003c\/li\u003e\n\u003cli\u003eOur open guard design ensures the intake never starves for air even during hard launches, aggressive turns, or low-speed situations where ram air designs fail and cause air flow restrictions. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA precisely engineered fluorolined silicone coupler connects the carbon tube directly to the supercharger inlet. Every connection is barbed for maximum security while minimizing joints to reduce the possible leak points.\u003c\/p\u003e\n\u003cp\u003eWe include a black anodized billet mount that uses factory chassis locations for a rock solid, clean installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Performance:\u003c\/strong\u003e We don’t make false claims, we provide real dyno proof. With a KWI Hyperdrive clutch kit, this intake helped to deliver a \u003cstrong\u003e+10 HP gain\u003c\/strong\u003e while improving throttle response and supercharger efficiency. Even without a tune, you’ll feel the bolt-on performance immediately. By itself we were seeing horsepower gains of around 5-6 HP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNO tune required for use. \u003c\/li\u003e\n\u003cli\u003eFactory intake block off cover\u003c\/li\u003e\n\u003cli\u003eCarbon fiber twill weave intake tube \u0026amp; filter guard, lightweight, strong, and heat dissipating\u003c\/li\u003e\n\u003cli\u003e4\" starting diameter with smooth, port matched transition, zero restrictions\u003c\/li\u003e\n\u003cli\u003eS\u0026amp;B dry air filter + RPM Hydrophobic pre-filter for superior filtration and easy maintenance\u003c\/li\u003e\n\u003cli\u003eCustom air filter guard for protection against mud, water, sand, and debris\u003c\/li\u003e\n\u003cli\u003eFluorolined silicone coupler with port matched interior\u003c\/li\u003e\n\u003cli\u003eBlack anodized billet chassis mount\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware, clamps, and parts for a complete install\u003c\/li\u003e\n\u003cli\u003e+10 HP proven on dyno with only a clutch kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis race focused intake is the ultimate upgrade for supercharged H2s that see hard dune bashing, desert running, drag strips, or high speed off road use. Maximum airflow, cooler charge air, and bulletproof construction, exactly what serious H2 riders need!\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/intake-tubes\"\u003eIntake\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580416655662,"sku":"CBK-KA-8","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2CarbonfiberIntakeFrontMain_812a962e-d73f-4610-946e-c75bcb907d81.jpg?v=1790571719"},{"product_id":"kawasaki-teryx-h2-brushless-intercooler-fan-and-shroud-kit","title":"Kawasaki Teryx H2 Brushless Intercooler Fan \u0026 Shroud Kit","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Brushless Intercooler Fan \u0026amp; Shroud Kit\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM SxS Kawasaki H2 Brushless Intercooler Fan \u0026amp; Sealed Shroud Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory intercooler fan and shroud on your supercharged Kawasaki H2 simply can’t keep up when you’re hammering it in the dunes, desert heat, or aggressive riding. High intake air temperatures (IAT) cause the ECU to pull power to protect the engine robbing you of performance exactly when you need it most.\u003c\/p\u003e\n\u003cp\u003eOur \u003cstrong\u003eStage 1 Brushless Intercooler Fan and Custom Sealed Shroud\u003c\/strong\u003e delivers a serious upgrade. Our \u003cstrong\u003e10\", 10-blade brushless fan\u003c\/strong\u003e flows \u003cstrong\u003eup to 1250 CFM\u003c\/strong\u003e which is roughly \u003cstrong\u003e20% more airflow\u003c\/strong\u003e than the stock 9\" brushed fan. At the same time, it draws only \u003cstrong\u003e6 amps at 13.5V\u003c\/strong\u003e, offering about \u003cstrong\u003e15% better electrical efficiency\u003c\/strong\u003e and putting far less strain on your charging system.\u003c\/p\u003e\n\u003cp\u003eWe engineered a custom shroud with premium \u003cstrong\u003eEPDM foam seals\u003c\/strong\u003e that creates a complete airtight seal to the factory intercooler. The stock shroud leaks air around the edges, wasting fan effort on hot bypass air instead of forcing it through the core. Our kit ensures \u003cstrong\u003e100% of the airflow is pulled through the intercooler, \u003c\/strong\u003eso you get no leaks, and maximum cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eAfter passing through the intercooler, the increased volume of air is then pushed by the fan blades directly across the top of the engine. This extra airflow helps the engine itself run noticeably cooler, especially during extended hard use in hot conditions.\u003c\/p\u003e\n\u003cp\u003eInstallation is effortless as it uses the \u003cstrong\u003efactory intercooler plugs\u003c\/strong\u003e for true plug \u0026amp; play fitment. A built in \u003cstrong\u003esoft ramp power supply\u003c\/strong\u003e starts the fan at just \u003cstrong\u003e1 amp\u003c\/strong\u003e and smoothly ramps up, eliminating harsh amperage spikes and reducing load on your electrical system. The fan and shroud mount directly to the factory intercooler with no modifications required. All hardware, wire clamps, and seals are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe results are dramatic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignificantly lower intake air temperatures\u003c\/li\u003e\n\u003cli\u003eFaster IAT recovery after hard pulls and aggressive use\u003c\/li\u003e\n\u003cli\u003eMuch more stable intake air temperatures under load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis helps keep your H2’s sensitive factory tune from pulling power, delivering stronger, more consistent performance in hot conditions, dune bashing, or desert running.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect for stock, modified, or aggressively driven H2s \u003c\/strong\u003e\u0026amp; and the ideal foundation if you’re planning bigger upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake your cooling even further:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1\u003c\/strong\u003e — 10\" Brushless Fan + Sealed Shroud (this kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2\u003c\/strong\u003e — Stage 1 paired with our big core intercooler for serious builds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 3 XL\u003c\/strong\u003e — Our massive XL intercooler that still fits the factory intercooler brackets with \u003cstrong\u003edual 8\" brushless fans\u003c\/strong\u003e is the ultimate charge air cooling solution for heavily tuned or aggressively driven H2s\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/intercoolers\"\u003eIntercoolers\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580418261294,"sku":"FAN-KA-2","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/IntercoolerShroudForOEMIntercoolerFullKit.jpg?v=1790571745"},{"product_id":"kawasaki-teryx-h2-stage-3-xl-intercooler-kit","title":"Kawasaki Teryx H2 Stage 3 XL Intercooler Kit","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Stage 3 XL Intercooler Kit\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Kawasaki H2 STAGE 3 XL Intercooler, Dual Brushless Fans, \u0026amp; Sealed Shroud Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory intercooler on your supercharged Kawasaki H2 is no match for serious dune bashing, desert heat, or aggressive high boost riding. When intake air temperatures (IAT) spike, the ECU pulls power aggressively robbing you of the massive performance your H2 is capable of delivering.\u003c\/p\u003e\n\u003cp\u003eOur \u003cstrong\u003eStage 3 XL Intercooler Kit\u003c\/strong\u003e is the ultimate charge air cooling solution for the Kawasaki H2. This beast features a massive high efficiency aluminum bar and plate core paired with \u003cstrong\u003edual high-flow 8-inch brushless fans\u003c\/strong\u003e and a fully sealed shroud that moves \u003cstrong\u003etwice the airflow volume\u003c\/strong\u003e of the stock single 9-inch fan.\u003c\/p\u003e\n\n\u003cp\u003eThe XL core measures \u003cstrong\u003e16\" (406mm) Wide x 11\" (279mm) Tall x 4\" (102mm) Thick\u003c\/strong\u003e delivering \u003cstrong\u003e33% larger core surface area\u003c\/strong\u003e and \u003cstrong\u003e113% more core volume\u003c\/strong\u003e than the factory intercooler. This massive increase in size and thickness pulls dramatically more heat out of the highly compressed charge air, virtually eliminating heat soak and allowing your supercharged H2 to deliver stronger, more consistent power for longer, even under the most extreme conditions.\u003c\/p\u003e\n\u003cp\u003eWe paired it with \u003cstrong\u003edual 8\" 10 blade brushless fans\u003c\/strong\u003e that deliver massive airflow while remaining highly efficient and gentle on your electrical system. The custom sealed shroud with EPDM foam seals creates an airtight fit, forcing 100% of the airflow through the XL core instead of allowing hot bypass air like the leaky stock setup.\u003c\/p\u003e\n\u003cp\u003eAfter cooling the charge air, the enormous volume of airflow is pushed directly across the top of the engine, helping keep the entire powerplant noticeably cooler during extended hard use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes the necessary silicone charge tubes (choose your color at checkout)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounts in the factory location using factory mounts and hardware\u003c\/li\u003e\n\u003cli\u003eReuses the red factory cover with no modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Highlights:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMassive XL bar \u0026amp; plate core: 16\" W x 11\" H x 4\" thick\u003c\/li\u003e\n\u003cli\u003e33% larger core surface area \u0026amp; 113% more core volume than factory\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary silicone charge tubes (choose your color at checkout)\u003c\/li\u003e\n\u003cli\u003eDual high-flow 8\" RPM brushless soft start fans\u003c\/li\u003e\n\u003cli\u003eFully sealed EPDM shroud for maximum cooling efficiency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounts in the factory location using factory mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis Stage 3 XL kit is the pinnacle of our H2 cooling lineup and builds directly on our Stage 1 fan\/shroud and Stage 2 big core systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eRequires minor trimming of the intercooler plastic shroud\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/intercoolers\"\u003eIntercoolers\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Black","offer_id":67580418359598,"sku":"INK-KA-2-BK","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":67580418392366,"sku":"INK-KA-2-GN","price":1199.95,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":67580418425134,"sku":"INK-KA-2-WT","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/KawiH2STAGE3DeluxeIntercoolerBothSidesWithSilicone.jpg?v=1790571748"},{"product_id":"kawasaki-teryx-h2-stage-2-big-core-intercooler-kit","title":"Kawasaki Teryx H2 Stage 2 Big Core Intercooler Kit","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Stage 2 Big Core Intercooler Kit\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Kawasaki H2 STAGE 2 Big Core Intercooler, Brushless Fan, \u0026amp; Sealed Shroud Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe factory intercooler on your supercharged Kawasaki H2 simply can't keep up when you're pushing it hard in the dunes, desert heat, or aggressive riding. Rising intake air temperatures force the ECU to pull power and timing to protect the engine, robbing you of the performance you crave exactly when you need it most. \u003c\/p\u003e\n\u003cp\u003eOur \u003cstrong\u003eStage 2 Big Core Intercooler Kit\u003c\/strong\u003e takes charge air cooling to the next level. It combines a significantly larger high efficiency aluminum bar and plate core with our proven 10\" RPM Brushless Fan and fully Sealed Shroud for dramatically lower and more stable IATs under demanding conditions.\u003c\/p\u003e\n\u003cp\u003eWe engineered a massive aluminum bar and plate core with dimensions of \u003cstrong\u003e12\" Wide x 11\" Tall x 4\" Deep\u003c\/strong\u003e delivering a \u003cstrong\u003e62% increase in core volume\u003c\/strong\u003e over stock. This extra volume pulls substantially more heat out of the compressed charge air, reducing heat soak and allowing your H2 to hold strong, consistent power even during extended hard use in the hottest of conditions.\u003c\/p\u003e\n\u003cp\u003ePaired with our efficient \u003cstrong\u003e10\" 10 blade brushless fan\u003c\/strong\u003e (drawing only ~6 amps at 13.5V), the kit delivers significantly more airflow than the factory 9\" brushed fan while placing far less strain on your electrical system. The custom sealed shroud uses premium EPDM foam seals to create an airtight seal around the core, completely eliminating the stock shroud's problematic air leaks. Unlike the OEM setup, which isn't sealed and allows air to pass through the fan from under the intercooler and between the shroud instead of being forced through the core, our design ensures 100% of the airflow goes through the big core for maximum cooling efficiency.\u003c\/p\u003e\n\u003cp\u003eAfter cooling the charge air, the increased volume of air is pushed directly across the top of the engine, providing additional cooling to help the engine itself run noticeably cooler during aggressive riding.\u003c\/p\u003e\n\u003cp\u003eThe kit utilizes your factory or RPM SxS silicone charge tubes for a true bolt on upgrade. Installation is straightforward with plug \u0026amp; play fan wiring using the factory intercooler plugs, no major modifications required, and all hardware, wire clamps, and seals included. A built in soft ramp power supply starts the fan gently at low amperage and smoothly but quickly ramps up, eliminating harsh spikes and reducing load on your charging system.\u003c\/p\u003e\n\u003cp\u003eThe results are dramatic:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSignificantly lower IAT's\u003c\/li\u003e\n\u003cli\u003eFaster IAT recovery after hard pulls and aggressive use\u003c\/li\u003e\n\u003cli\u003eMuch more stable intake air temperatures under sustained load\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStronger, more consistent performance  (ideal for stock, modified, or aggressively driven H2s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis Stage 2 kit builds perfectly on our Stage 1 Brushless Fan \u0026amp; Sealed Shroud foundation, giving you serious cooling gains when you're ready for more than just the fan upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTake your cooling even further:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 1\u003c\/strong\u003e — 10\" Brushless Fan + Sealed Shroud (foundation upgrade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 2\u003c\/strong\u003e — Big Core Intercooler + Brushless Fan + Sealed Shroud (this kit is perfect for aggressive riding and moderate builds)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage 3 XL\u003c\/strong\u003e — Our massive XL intercooler that still fits the factory intercooler brackets with dual 8\" brushless fans, the ultimate charge air cooling solution for heavily tuned or extreme use H2s\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/intercoolers\"\u003eIntercoolers\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580418490670,"sku":"INK-KA-1","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2Stage2IntercoolerFrontAndRear.jpg?v=1790571749"},{"product_id":"kawasaki-teryx-h2-exhaust-tip-set","title":"Kawasaki Teryx H2 Exhaust Tip Set","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Exhaust Tip Set\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Stainless Polished \u0026amp; Blued Exhaust Tips for RPM H2 Mufflers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your Kawasaki H2 with these custom designed stainless steel exhaust tips, made specifically for RPM's H2 Chambered and Dual Sport Mufflers. Featuring a sleek slant-cut design with rolled edges, they give your H2 a finished, aggressive look while clearly signaling that it’s equipped with a premium aftermarket exhaust.\u003c\/p\u003e\n\u003cp\u003eEach tip includes the necessary clamps for a secure, easy installation. Available in polished or blued finishes, these tips add a distinctive, standout appearance that sets your UTV apart from the rest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOLD AS A PAIR \u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Polished","offer_id":67580418621742,"sku":"TP-9-ST","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":67580418654510,"sku":"TP-9-BL","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2ExhaustTipsBothMain.jpg?v=1790571751"},{"product_id":"kawasaki-teryx-h2-2-5-inch-dual-sport-full-exhaust","title":"Kawasaki Teryx H2 2.5-Inch Dual Sport Full Exhaust","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 2.5-Inch Dual Sport Full Exhaust\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eRPM Powersports 2.5\" Full Exhaust System for Kawasaki Teryx H2 – Dual Sport Muffler with Optional E-Valve\u003c\/p\u003e\n\u003cp\u003eEngineered and rigorously tested in-house by RPM Powersports, this full H2 exhaust system delivers a perfect balance of increased performance, extreme durability, and a sportier exhaust note for riders who want more presence without sacrificing refinement. First, we directly addressed the factory exhaust’s biggest flaw — the extremely restrictive header that bottlenecks badly at the collector on the supercharged H2.\u003c\/p\u003e\n\u003cp\u003eOur header starts with a precision laser-cut flange that is internally and externally TIG-welded for a perfectly smooth transitions into the primary tubes. The optimally tuned primary tubes hug the back of the engine to help reduce heat transfer into the cargo area. The primary tubes feed into our unique 4-1 cyclonic collector, that helps to manage the high exhaust flow rates associated with a supercharged engine.\u003c\/p\u003e\n\u003cp\u003eSpherical composite graphite gaskets create the perfect seal the header to the exhaust while maintaining uninterrupted exhaust flow. The system is secured with heavy-duty exhaust springs that allow the exhaust to flex and move naturally during extreme abuse or rough terrain. This prevents the cracks and leaks that rigid connections commonly develop.\u003c\/p\u003e\n\u003cp\u003eThe header connects to our muffler mid pipe assembly that utilizes two of our proprietary RPM Dual Sport pass-through mufflers in series. This leads to a smooth split into dual exhaust tips that exit cleanly through the factory rear fascia for an aggressive, symmetrical look. The result is a slightly sportier and more pronounced exhaust note than our Q-Series chambered muffler — delivering a few extra decibels of throaty character while still remaining trail-friendly and not obnoxiously loud.\u003c\/p\u003e\n\u003cp\u003eChoose from the standard configuration or upgrade to our famous RPM E-Valve setup for versatile on-demand sound control at the flip of a switch: quiet and civilized when you want it, bold and aggressive when you need it. Both configurations include dual O2 bungs — one for the factory sensor and one conveniently located M18 bung (the most common size for wideband sensors during dyno tuning and data logging). An O2 bung plug is included for when the M18 bung is not in use.\u003c\/p\u003e\n\u003cp\u003eOur Dual Sport muffler setup is engineered specifically for the H2’s unique exhaust flow characteristics. The dual pass-through design provides excellent flow while producing a sportier, deeper tone with slightly more volume than the chambered Q-Series, all while supporting well into the 300+ HP range without restriction. This makes it an ideal choice for riders who want enhanced sound and presence on stock or heavily boosted builds.\u003c\/p\u003e\n\u003cp\u003eKey Features and Benefits\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven Performance: +26 HP (+12% increase) over stock when paired with an RPM Carbon Intake and 91 octane tune. Tuning is not required, however, it will maximize the benefits of our exhaust.\u003c\/li\u003e\n\u003cli\u003eOptimally Tuned Header Design – optimally tuned primary tube lengths and diameter for maximum exhaust flow through our cyclonic 4-1 collector, perfectly matched to the centrifugal supercharger’s elevated exhaust mass flow and 120–140 % VE.\u003c\/li\u003e\n\u003cli\u003eSpherical Composite Graphite Gaskets – create a perfect seal without interrupting exhaust flow and eliminate metal-on-metal contact that causes leaks or fitment issues.\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Exhaust Springs – allow the exhaust to flex and move naturally during extreme abuse or rough terrain, preventing cracks and leaks common with rigid connections.\u003c\/li\u003e\n\u003cli\u003eDual O2 Bungs – factory sensor location plus a conveniently placed M18 wideband bung, and we include the bung plug.\u003c\/li\u003e\n\u003cli\u003eDual Sport Muffler Configuration – two proprietary RPM pass-through mufflers deliver a sportier, slightly louder tone (a few dB more than the Q-Series) with strong flow for 300+ HP applications.\u003c\/li\u003e\n\u003cli\u003eClean Dual Exit Design – splits after the second muffler into dual tips exiting through the factory fascia for a bold, factory-inspired yet aggressive appearance.\u003c\/li\u003e\n\u003cli\u003eBarbed CNC Isolator Pins – lock securely into the factory isolators and won’t pull out under hard hits or rough conditions.\u003c\/li\u003e\n\u003cli\u003eSpark Arrestor Ready – compatible with our optional RPM spark arrestors for closed-course or trail compliance.\u003c\/li\u003e\n\u003cli\u003e\nOptional Polished or Blued Tips – upgrade for a sharper, more aggressive look that sets your H2 apart.\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt with premium 304 stainless steel and TIG-welded throughout for maximum strength and reliability in the harshest conditions.\u003c\/p\u003e\n\u003cp\u003eRun the system plain for a clean, integrated appearance or add our custom tips to make your Teryx H2 stand out on the trail or dunes. Thoughtfully engineered by riders, for riders, this Dual Sport full exhaust system offers the ideal step up in sound and character while maintaining the same elite fit, finish, and performance DNA as our renowned Q-Series system.\u003c\/p\u003e \u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eExhaust Comparison\u003c\/h3\u003e\n\u003cp\u003ePower · Sound · Weight\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePeak HP\u003c\/th\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003cth\u003edB @ 4k\u003c\/th\u003e\n\u003cth\u003edB w\/ E-Valve Open @ 4k\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eSavings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003ctd\u003e213.52\u003c\/td\u003e\n\u003ctd\u003eBaseline\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Carbon Fiber Intake \u0026amp; Tune\u003c\/td\u003e\n\u003ctd\u003e224.7 +11.18\n\u003c\/td\u003e\n\u003ctd\u003e+5%\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nBig Mouth E-ValvePre-Muffler Replacement w\/ 6\" Resonator\n\u003c\/td\u003e\n\u003ctd\u003e229.53 +16.01\n\u003c\/td\u003e\n\u003ctd\u003e+7%\u003c\/td\u003e\n\u003ctd\u003e103.7\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e27.5 lb\u003c\/td\u003e\n\u003ctd\u003e−21.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3\/4 Exhaust2.5\" Mid Pipe + Chambered Muffler\n\u003c\/td\u003e\n\u003ctd\u003e231.7 +18.18\n\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e104.8\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e33.6 lb\u003c\/td\u003e\n\u003ctd\u003e−15.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Chambered Full ExhaustPopular\u003c\/td\u003e\n\u003ctd\u003e233.83 +20.31\n\u003c\/td\u003e\n\u003ctd\u003e+10%\u003c\/td\u003e\n\u003ctd\u003e105.7\u003c\/td\u003e\n\u003ctd\u003e113.9\u003c\/td\u003e\n\u003ctd\u003e27.9 lb\u003c\/td\u003e\n\u003ctd\u003e−21.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Dual Sport Full Exhaust\u003c\/td\u003e\n\u003ctd\u003e239.77 +26.25\n\u003c\/td\u003e\n\u003ctd\u003e+12% MAX\u003c\/td\u003e\n\u003ctd\u003e104.6\u003c\/td\u003e\n\u003ctd\u003e117.6\u003c\/td\u003e\n\u003ctd\u003e30.6 lb\u003c\/td\u003e\n\u003ctd\u003e−18.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e All exhaust data is shown with a RPM carbon fiber intake \u0026amp; tune\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Standard Dual Sport \/ Polished","offer_id":67580419080494,"sku":"EKT-KA-17-BR-PL","price":1579.95,"currency_code":"USD","in_stock":true},{"title":"Standard Dual Sport \/ Blue","offer_id":67580419113262,"sku":"EKT-KA-17-BR-BL","price":1599.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve Dual Sport \/ Polished","offer_id":67580419146030,"sku":"EKT-KA-18-BR-PL","price":1879.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve Dual Sport \/ Blue","offer_id":67580419178798,"sku":"EKT-KA-18-BR-BL","price":1899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2DualSportMufflerBothFrontMain_17f2e956-4ab0-49d3-a834-165b6d124927.jpg?v=1790571766"},{"product_id":"kawasaki-teryx-h2-2-5-inch-chambered-full-exhaust","title":"Kawasaki Teryx H2 2.5-Inch Chambered Full Exhaust","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 2.5-Inch Chambered Full Exhaust\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Powersports 2.5\" Full Exhaust System for Kawasaki Teryx H2 – Q-Series Chambered Muffler with Optional E-Valve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered and rigorously tested in-house by RPM Powersports, this full H2 exhaust system is a true masterpiece designed for riders who demand superior performance, durability, and refined sound on the all-new 250-horsepower supercharged 2026 Teryx H2 lineup.\u003c\/p\u003e\n\n\u003cp\u003eWe addressed the factory exhaust’s biggest flaw head-on, its restrictive 4-2-1 header and collector that bottlenecks down restricting the\u003cstrong\u003e \u003c\/strong\u003ehigh exhaust gas flow rate generated by the centrifugal supercharger. Because the H2 forces air into the cylinders at up to 2.4× atmospheric pressure, the engine achieves an estimated volumetric efficiency of 120–140 % under peak boost, far beyond what a naturally aspirated engine can manage. That extra airflow means a dramatically higher exhaust velocity, especially at high rpm where the supercharger’s efficiency peaks.\u003c\/p\u003e\n\u003cp\u003eOur header starts with a precision laser-cut flange that is internally and externally TIG-welded for a perfectly smooth transitions into the primary tubes. The optimally tuned primary tubes hug the back of the engine to help reduce heat transfer into the cargo area. The primary tubes feed into our unique 4-1 cyclonic collector, that helps to manage the high exhaust flow rates associated with a supercharged engine.\u003c\/p\u003e\n\u003cp\u003eSpherical composite graphite gaskets create the perfect seal at every mating surface while maintaining uninterrupted exhaust flow. The system is secured with heavy-duty exhaust springs that allow the exhaust to flex and move naturally during extreme abuse or rough terrain. This prevents the cracks and leaks that rigid connections commonly develop.\u003c\/p\u003e\n\u003cp\u003eThe header connects to our large-radius, free-flowing 2.5\" mid pipes. Choose the standard mid pipe or upgrade to our famous RPM E-Valve setup for versatile on-demand sound control at the flip of a switch, quiet and refined when you want it, aggressive when you need it. Both mid pipe options include dual O2 bungs: one for the factory sensor and one conveniently located M18 bung (the most common size for wideband sensors during dyno tuning and data logging). An O2 bung plug is included.\u003c\/p\u003e\n\u003cp\u003eOur RPM Q-Series chambered muffler is our quietest option, engineered specifically for the H2’s unique high flow exhaust characteristics. It uses mechanical chambers and precise internal geometry for excellent sound control while flowing freely enough to support well into the 300+ HP range, ensuring it never becomes a restriction on stock or heavily boosted builds. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features and Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProven Performance\u003c\/strong\u003e: +23 HP (≈+11 % gain) over the stock baseline when paired with an RPM Carbon Intake and 91-octane tune. Tuning is not required, however, it will maximize the benefits of our exhaust.\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimally Tuned Header Design\u003c\/strong\u003e – tuned primary tube lengths and diameter deliver maximum exhaust flow through our cyclonic 4-1 collector, perfectly matched to the centrifugal supercharger’s elevated exhaust mass flow and 120–140 % VE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Composite Graphite Gaskets\u003c\/strong\u003e – perfect seal without interrupting flow and eliminate metal-on-metal contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Exhaust Springs\u003c\/strong\u003e – allow natural flex during hard hits or rough terrain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-Radius 2.5\" Mid Pipes\u003c\/strong\u003e – fully free flowing with optional RPM E-Valve for on-demand sound control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual O2 Bungs\u003c\/strong\u003e – factory location plus M18 wideband bung (plug included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuietest Q-Series Chambered Muffler\u003c\/strong\u003e – tailored to the H2’s supercharged flow dynamics; supports 300+ HP without restriction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 304 Stainless Muffler Bracket\u003c\/strong\u003e – perfect centering in the rear fascia.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbed-Head CNC Isolator Pins\u003c\/strong\u003e – lock securely into factory isolators.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpark Arrestor Ready\u003c\/strong\u003e – compatible with optional RPM spark arrestors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Polished or Blued Tips\u003c\/strong\u003e – for a sharper, more aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt with premium 304 stainless steel and TIG welded throughout for maximum strength and reliability. Run the system plain for a clean, stock like appearance or add our custom tips to make your Teryx H2 stand out on the trail or dunes. Thoughtfully engineered by riders, for riders this is the most complete and refined full exhaust system available for the Kawasaki Teryx H2.\u003c\/p\u003e \u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eExhaust Comparison\u003c\/h3\u003e\n\u003cp\u003ePower · Sound · Weight\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePeak HP\u003c\/th\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003cth\u003edB @ 4k\u003c\/th\u003e\n\u003cth\u003edB w\/ E-Valve Open @ 4k\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eSavings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003ctd\u003e213.5\u003c\/td\u003e\n\u003ctd\u003eBaseline\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Carbon Fiber Intake \u0026amp; Tune\u003c\/td\u003e\n\u003ctd\u003e224.70+11.2\n\u003c\/td\u003e\n\u003ctd\u003e+5%\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nBig Mouth E-ValvePre-Muffler Replacement w\/ 6\" Resonator\n\u003c\/td\u003e\n\u003ctd\u003e229.53 +16.0\n\u003c\/td\u003e\n\u003ctd\u003e+7%\u003c\/td\u003e\n\u003ctd\u003e103.7\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e27.5 lb\u003c\/td\u003e\n\u003ctd\u003e−21.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3\/4 Exhaust2.5\" Mid Pipe + Chambered Muffler\n\u003c\/td\u003e\n\u003ctd\u003e231.70+18.1\n\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e104.8\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e33.6 lb\u003c\/td\u003e\n\u003ctd\u003e−15.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Chambered Full ExhaustPopular\u003c\/td\u003e\n\u003ctd\u003e236.64 +23.1\n\u003c\/td\u003e\n\u003ctd\u003e+11%\u003c\/td\u003e\n\u003ctd\u003e105.7\u003c\/td\u003e\n\u003ctd\u003e113.9\u003c\/td\u003e\n\u003ctd\u003e27.9 lb\u003c\/td\u003e\n\u003ctd\u003e−21.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Dual Sport Full Exhaust\u003c\/td\u003e\n\u003ctd\u003e241.24+27.7\n\u003c\/td\u003e\n\u003ctd\u003e+13% MAX\u003c\/td\u003e\n\u003ctd\u003e104.6\u003c\/td\u003e\n\u003ctd\u003e117.6\u003c\/td\u003e\n\u003ctd\u003e30.6 lb\u003c\/td\u003e\n\u003ctd\u003e−18.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e All exhaust data is shown with a RPM carbon fiber intake \u0026amp; tune\u003c\/div\u003e\n\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Standard \/ Polished","offer_id":67580419244334,"sku":"EKT-KA-15-BR-PL","price":1479.95,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Blue","offer_id":67580419277102,"sku":"EKT-KA-15-BR-BL","price":1499.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve \/ Polished","offer_id":67580419309870,"sku":"EKT-KA-16-BR-PL","price":1779.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve \/ Blue","offer_id":67580419342638,"sku":"EKT-KA-16-BR-BL","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2Chambered2.5InchFullExhaustBOTHMAIN_87fa05e9-6953-4138-a51e-e72a260f01b6.jpg?v=1790571768"},{"product_id":"kawasaki-teryx-h2-3-4-exhaust-system","title":"Kawasaki Teryx H2 3\/4 Exhaust System","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 3\/4 Exhaust System\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM SxS Kawasaki Teryx H2 2.5\" 3\/4 Chambered Exhaust | Straight or E-Valve Option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith extensive dyno testing, tubing size comparisons, bend radius optimizations, alongside advanced flow simulation software, we’ve developed the perfect 3\/4 exhaust system built specifically for the supercharged Kawasaki Teryx H2.\u003c\/p\u003e\n\n\u003cp\u003eStarting with the muffler being engineered from the ground up for the H2 platform, taking its unique exhaust flow characteristics into full consideration. The \u003cstrong\u003eRPM Chambered Q-Muffler\u003c\/strong\u003e was designed in house by RPM engineers. It features mechanical chambers and precise internal geometry to deliver excellent sound control while flowing enough exhaust gas to support well into the 300+ HP range. Whether you’re on a stock tune or planning higher-boost upgrades later, this system will never become a restriction.\u003c\/p\u003e\n\u003cp\u003eThis complete 3\/4 exhaust system features a true 2.5\" mid pipe that bolts directly to the factory header using factory hardware. The mid pipe includes dual O2 bungs, one for the factory O2 sensor and one M18 bung. The conveniently located M18 bung is the most common size used for wideband sensors during dyno tuning and data logging. An O2 bung plug is included for when the M18 bung is not in use.\u003c\/p\u003e\n\u003cp\u003eAt the muffler to mid pipe connection, we use a custom proprietary gasket for a perfect seal, eliminating metal on metal contact. The muffler and mid pipe joints are connected with heavy duty springs. This design allows the entire exhaust to flex and move naturally during extreme abuse or rough terrain, preventing the cracks and leaks that commonly develop with rigid connections.\u003c\/p\u003e\n\u003cp\u003eThe system mounts to the factory top rubber isolated hangers using our CNC machined pins with a barbed head, ensuring it stays securely in place even in rough and abusive conditions. For the bottom mount, we include a custom adjustable 304 stainless steel lower bracket that keeps the exhaust perfectly centered in the rear fascia unlike many others that sit crooked or rub due to lack of adjustability.\u003c\/p\u003e\n\u003cp\u003eAt the rear fascia, you can run the system plain for a stock like appearance or upgrade with our optional custom exhaust tips. Choose polished or blued tips for a sharp, aggressive look that sets your H2 apart.\u003c\/p\u003e\n\u003cp\u003eBuilt from high quality 304 stainless with precision TIG welding throughout, this 3\/4 system delivers real performance gains, even on a stock tune, while reducing heat radiation. It gives you a deep, satisfying tone with controlled rasp, without excessive drone or being overly loud.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose your mid-pipe style at checkout:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight mid-pipe\u003c\/strong\u003e – for a clean, simple setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic E-Valve Mid-Pipe\u003c\/strong\u003e – for true on demand transformation. Switch between a loud, aggressive roar or a quieter, refined tone whenever you want.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" mid-pipe + custom mechanically chambered muffler designed specifically for the Teryx H2\u003c\/li\u003e\n\u003cli\u003eSupports well into the 300+ HP range – perfect for stock or high-boost builds\u003c\/li\u003e\n\u003cli\u003eChoose straight mid-pipe or Electronic E-Valve for on-demand loud\/quiet control\u003c\/li\u003e\n\u003cli\u003eHeavy-duty spring connections allow movement during extreme abuse\u003c\/li\u003e\n\u003cli\u003eAdjustable 304 stainless lower bracket for perfect centering in the rear fascia\u003c\/li\u003e\n\u003cli\u003eUses factory O2 bung plus extra M18 bung \u0026amp; plug\u003c\/li\u003e\n\u003cli\u003eOptional polished or blued exhaust tips for enhanced aesthetics\u003c\/li\u003e\n\u003cli\u003e100% bolt-on installation – no cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eNo tuning needed\u003c\/li\u003e\n\u003cli\u003eTIG-welded stainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces exhaust heat radiation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLike every RPM SxS exhaust, this system is built for riders who demand real engineering, bulletproof durability, and easy installation.\u003c\/p\u003e\n\u003cp\u003eReady to transform your supercharged Teryx H2 with a purpose built 3\/4 exhaust system? Choose your mid-pipe and tip options, then add to cart today!\u003c\/p\u003e \u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eExhaust Comparison\u003c\/h3\u003e\n\u003cp\u003ePower · Sound · Weight\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePeak HP\u003c\/th\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003cth\u003edB @ 4k\u003c\/th\u003e\n\u003cth\u003edB w\/ E-Valve Open @ 4k\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eSavings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003ctd\u003e213.5\u003c\/td\u003e\n\u003ctd\u003eBaseline\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Carbon Fiber Intake \u0026amp; Tune\u003c\/td\u003e\n\u003ctd\u003e224.70+11.2\n\u003c\/td\u003e\n\u003ctd\u003e+5%\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nBig Mouth E-ValvePre-Muffler Replacement w\/ 6\" Resonator\n\u003c\/td\u003e\n\u003ctd\u003e229.53 +16.0\n\u003c\/td\u003e\n\u003ctd\u003e+7%\u003c\/td\u003e\n\u003ctd\u003e103.7\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e27.5 lb\u003c\/td\u003e\n\u003ctd\u003e−21.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3\/4 Exhaust2.5\" Mid Pipe + Chambered Muffler\n\u003c\/td\u003e\n\u003ctd\u003e231.70+18.1\n\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e104.8\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e33.6 lb\u003c\/td\u003e\n\u003ctd\u003e−15.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Chambered Full ExhaustPopular\u003c\/td\u003e\n\u003ctd\u003e236.64 +23.1\n\u003c\/td\u003e\n\u003ctd\u003e+11%\u003c\/td\u003e\n\u003ctd\u003e105.7\u003c\/td\u003e\n\u003ctd\u003e113.9\u003c\/td\u003e\n\u003ctd\u003e27.9 lb\u003c\/td\u003e\n\u003ctd\u003e−21.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Dual Sport Full Exhaust\u003c\/td\u003e\n\u003ctd\u003e241.24+27.7\n\u003c\/td\u003e\n\u003ctd\u003e+13% MAX\u003c\/td\u003e\n\u003ctd\u003e104.6\u003c\/td\u003e\n\u003ctd\u003e117.6\u003c\/td\u003e\n\u003ctd\u003e30.6 lb\u003c\/td\u003e\n\u003ctd\u003e−18.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e All exhaust data is shown with a RPM carbon fiber intake \u0026amp; tune\u003c\/div\u003e\n\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Standard \/ Polish","offer_id":67580419440942,"sku":"EKT-KA-13-BR-PL","price":979.95,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Blue","offer_id":67580419473710,"sku":"EKT-KA-13-BR-BL","price":999.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve \/ Polish","offer_id":67580419506478,"sku":"EKT-KA-14-BR-PL","price":1279.95,"currency_code":"USD","in_stock":true},{"title":"E-Valve \/ Blue","offer_id":67580419539246,"sku":"EKT-KA-14-BR-BL","price":1299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2ChamberedAndE-ValveCatDeleteKitBothMain_d36952b6-119f-4f09-8d6c-b5f27eb4dabd.jpg?v=1790571770"},{"product_id":"kawasaki-teryx-h2-big-mouth-resonated-cat-delete-mid-pipe-with-e-valve","title":"Kawasaki Teryx H2 Big Mouth Resonated Cat Delete Mid Pipe With E-Valve","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Big Mouth Resonated Cat Delete Mid Pipe With E-Valve\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM Kawasaki H2 Big Mouth E-Valve Pre-muffler Replacement w\/ 6\" Resonator – Electronic Dump Valve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith many dyno comparisons, changes to tubing size and bends, we've landed here on the perfect OEM muffler replacement with integrated E-Valve. We added a 6\" resonator for maximum flow efficiency and the smoothest possible performance, while significantly reducing rasp and unwanted noise from the exhaust tone. A slight increase to 50mm tubing created the ideal exhaust flow balance leading to the factory rear muffler.\u003c\/p\u003e\n\u003cp\u003eThis is a true direct replacement for the primary OEM muffler. Instead of a simple straight pipe or crude delete, we engineered a high-flow electronic dump valve followed immediately by an integrated 6\" resonator.\u003c\/p\u003e\n\u003cp\u003eWhen the E-Valve is closed, the resonator knocks down the noise for a quieter, more refined tone. Flip the switch and the valve opens to unleash a loud, aggressive roar with even stronger power delivery. You get the best of both worlds: serious sound and performance on demand, without the constant rasp or drone of typical deletes.\u003c\/p\u003e\n\u003cp\u003eIt mounts using the factory mounting brackets, factory gaskets, and factory hardware. 100% bolt-on with zero cutting, welding, or modifications required. No tuning needed either. It installs exactly like the stock muffler.\u003c\/p\u003e\n\u003cp\u003eBuilt from high quality stainless steel and precision TIG welded for maximum durability. This design unlocks real performance gains on a stock tune while reducing heat radiation compared to the stock muffler. Add a tune and the gains become even more phenomenal.\u003c\/p\u003e\n\u003cp\u003eWe've added a second 18mm O2 bung for easy dyno work or wideband data logging, while keeping the factory O2 sensor location fully intact for normal operation. A muffler-side gasket is included although we recommend replacing the header side gasket at the same time (not required).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for the primary OEM muffler\u003c\/li\u003e\n\u003cli\u003eElectronic E-valve with integrated 6\" resonator for smart sound control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlight 50mm tubing increase for ideal flow to the factory rear muffler\u003c\/li\u003e\n\u003cli\u003eUses all factory mounting brackets, gaskets, and hardware\u003c\/li\u003e\n\u003cli\u003eNo tuning, no modifications, no cutting required\u003c\/li\u003e\n\u003cli\u003eRetains factory O2 bung + second 18mm O2 bung for dyno\/data logging\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; play wiring harness with backlit switch included\u003c\/li\u003e\n\u003cli\u003ePrecision TIG welded stainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces exhaust heat radiation\u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eExhaust Comparison\u003c\/h3\u003e\n\u003cp\u003ePower · Sound · Weight\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePeak HP\u003c\/th\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003cth\u003edB @ 4k\u003c\/th\u003e\n\u003cth\u003edB w\/ E-Valve Open @ 4k\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eSavings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003ctd\u003e213.5\u003c\/td\u003e\n\u003ctd\u003eBaseline\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Carbon Fiber Intake \u0026amp; Tune\u003c\/td\u003e\n\u003ctd\u003e224.70+11.2\n\u003c\/td\u003e\n\u003ctd\u003e+5%\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nBig Mouth E-ValvePre-Muffler Replacement w\/ 6\" Resonator\n\u003c\/td\u003e\n\u003ctd\u003e229.53 +16.0\n\u003c\/td\u003e\n\u003ctd\u003e+7%\u003c\/td\u003e\n\u003ctd\u003e103.7\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e27.5 lb\u003c\/td\u003e\n\u003ctd\u003e−21.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3\/4 Exhaust2.5\" Mid Pipe + Chambered Muffler\n\u003c\/td\u003e\n\u003ctd\u003e231.70+18.1\n\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e104.8\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e33.6 lb\u003c\/td\u003e\n\u003ctd\u003e−15.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Chambered Full ExhaustPopular\u003c\/td\u003e\n\u003ctd\u003e236.64 +23.1\n\u003c\/td\u003e\n\u003ctd\u003e+11%\u003c\/td\u003e\n\u003ctd\u003e105.7\u003c\/td\u003e\n\u003ctd\u003e113.9\u003c\/td\u003e\n\u003ctd\u003e27.9 lb\u003c\/td\u003e\n\u003ctd\u003e−21.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Dual Sport Full Exhaust\u003c\/td\u003e\n\u003ctd\u003e241.24+27.7\n\u003c\/td\u003e\n\u003ctd\u003e+13% MAX\u003c\/td\u003e\n\u003ctd\u003e104.6\u003c\/td\u003e\n\u003ctd\u003e117.6\u003c\/td\u003e\n\u003ctd\u003e30.6 lb\u003c\/td\u003e\n\u003ctd\u003e−18.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e All exhaust data is shown with a RPM carbon fiber intake \u0026amp; tune\u003c\/div\u003e\n\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580419670318,"sku":"EKT-KA-5-BR","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H22InchE-valveMidpipeCatDeleteFrontMain.jpg?v=1790571773"},{"product_id":"kawasaki-teryx-h2-big-mouth-resonated-cat-delete-mid-pipe","title":"Kawasaki Teryx H2 Big Mouth Resonated Cat Delete Mid Pipe","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Big Mouth Resonated Cat Delete Mid Pipe\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRPM SxS Kawasaki Teryx H2 Big Mouth Muffler Replacement w\/ 6\" Resonator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith many dyno comparisons, changes to tubing size and bends, we've landed here on the perfect OEM muffler replacement with integrated resonator. We added a 6\" resonator for maximum flow efficiency and the smoothest possible performance, while significantly reducing rasp and unwanted noise from the exhaust tone. A slight increase to 50mm tubing created the ideal exhaust flow balance leading to the factory rear muffler.\u003c\/p\u003e\n\u003cp\u003eThis is a true direct replacement for the primary OEM muffler. Instead of a simple straight pipe or crude delete, we engineered a high-flow 6\" resonator right where it delivers the most benefit.\u003c\/p\u003e\n\u003cp\u003eWhen installed, the resonator knocks down the noise for a much quieter, more refined tone. You still get a deep, aggressive roar and strong power delivery when you want it, without the constant rasp or drone of typical straight pipe deletes.\u003c\/p\u003e\n\u003cp\u003eIt mounts using the factory mounting brackets, factory-style gaskets, and factory hardware. 100% bolt-on with zero cutting, welding, or modifications required. No tuning needed either. It installs exactly like the stock muffler.\u003c\/p\u003e\n\u003cp\u003eBuilt from high quality stainless steel with precision TIG welding for maximum durability and flow. This design unlocks real performance gains on a stock tune while reducing heat radiation compared to the stock muffler. Add a tune and the gains become even more phenomenal.\u003c\/p\u003e\n\u003cp\u003eWe've included a second 18mm O2 bung for easy dyno work or wideband data logging, while keeping the factory O2 sensor location fully intact for normal operation. A muffler side gasket is included. We recommend replacing the header-side gasket at the same time (not required).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for the primary OEM muffler\u003c\/li\u003e\n\u003cli\u003eHigh-flow 6\" integrated resonator for smart sound control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlight 50mm tubing increase for ideal flow to the factory rear muffler\u003c\/li\u003e\n\u003cli\u003eUses all factory mounting brackets, gaskets, and hardware\u003c\/li\u003e\n\u003cli\u003eNo tuning, no modifications, no cutting required\u003c\/li\u003e\n\u003cli\u003eRetains factory O2 bung + second 18mm O2 bung for dyno\/data logging\u003c\/li\u003e\n\u003cli\u003ePrecision TIG welded stainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces exhaust heat radiation\u003c\/li\u003e\n\u003c\/ul\u003e \u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eExhaust Comparison\u003c\/h3\u003e\n\u003cp\u003ePower · Sound · Weight\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003ePeak HP\u003c\/th\u003e\n\u003cth\u003eGain\u003c\/th\u003e\n\u003cth\u003edB @ 4k\u003c\/th\u003e\n\u003cth\u003edB w\/ E-Valve Open @ 4k\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eSavings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock\u003c\/td\u003e\n\u003ctd\u003e213.5\u003c\/td\u003e\n\u003ctd\u003eBaseline\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRPM Carbon Fiber Intake \u0026amp; Tune\u003c\/td\u003e\n\u003ctd\u003e224.70+11.2\n\u003c\/td\u003e\n\u003ctd\u003e+5%\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e48.9 lb\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\nBig Mouth E-ValvePre-Muffler Replacement w\/ 6\" Resonator\n\u003c\/td\u003e\n\u003ctd\u003e229.53 +16.0\n\u003c\/td\u003e\n\u003ctd\u003e+7%\u003c\/td\u003e\n\u003ctd\u003e103.7\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e27.5 lb\u003c\/td\u003e\n\u003ctd\u003e−21.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n3\/4 Exhaust2.5\" Mid Pipe + Chambered Muffler\n\u003c\/td\u003e\n\u003ctd\u003e231.70+18.1\n\u003c\/td\u003e\n\u003ctd\u003e+9%\u003c\/td\u003e\n\u003ctd\u003e104.8\u003c\/td\u003e\n\u003ctd\u003e114.3\u003c\/td\u003e\n\u003ctd\u003e33.6 lb\u003c\/td\u003e\n\u003ctd\u003e−15.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Chambered Full ExhaustPopular\u003c\/td\u003e\n\u003ctd\u003e236.64 +23.1\n\u003c\/td\u003e\n\u003ctd\u003e+11%\u003c\/td\u003e\n\u003ctd\u003e105.7\u003c\/td\u003e\n\u003ctd\u003e113.9\u003c\/td\u003e\n\u003ctd\u003e27.9 lb\u003c\/td\u003e\n\u003ctd\u003e−21.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2.5\" Dual Sport Full Exhaust\u003c\/td\u003e\n\u003ctd\u003e241.24+27.7\n\u003c\/td\u003e\n\u003ctd\u003e+13% MAX\u003c\/td\u003e\n\u003ctd\u003e104.6\u003c\/td\u003e\n\u003ctd\u003e117.6\u003c\/td\u003e\n\u003ctd\u003e30.6 lb\u003c\/td\u003e\n\u003ctd\u003e−18.3 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e All exhaust data is shown with a RPM carbon fiber intake \u0026amp; tune\u003c\/div\u003e\n\u003c\/div\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/exhaust-systems\"\u003eUTV \u0026amp; ATV Exhaust Systems \u0026amp; Parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580419735854,"sku":"EKT-KA-4-BR","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H22InchCatDeleteMidpipeFrontMain.jpg?v=1790571776"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-seat-belt-covers","title":"Kawasaki Teryx H2 Carbon Fiber Seat Belt Covers","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Seat Belt Covers\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber seat belt covers, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003c\/li\u003e\n\u003cli\u003eIncludes driver and passenger side covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/krx\"\u003eKawasaki\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580420030766,"sku":"CRB-KA-5","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2CarbonSeatbeltRetractorCoverBothFrontMain.jpg?v=1790571780"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-4-piece-pillar-covers-kit","title":"Kawasaki Teryx H2 Carbon Fiber 4 Piece Pillar Covers Kit","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber 4 Piece Pillar Covers Kit\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber pillar covers, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003c\/li\u003e\n\u003cli\u003eIncludes driver and passenger side covers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/krx\"\u003eKawasaki\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580420620590,"sku":"CBK-KA-7","price":439.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2_Carbon_Pillars_Front_Main.png?v=1790571793"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-regulator-rectifier-cover","title":"Kawasaki Teryx H2 Carbon Fiber Regulator Rectifier Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Regulator Rectifier Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber regulator rectifier cover, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance-focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eIncludes new mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/krx\"\u003eKawasaki\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580420882734,"sku":"CBK-KA-9","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/CarbonRegulatorCoverFrontMain.jpg?v=1790571795"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-coolant-reservoir-cover","title":"Kawasaki Teryx H2 Carbon Fiber Coolant Reservoir Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Coolant Reservoir Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber coolant reservoir cover, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/oil-chemicals\"\u003eOil \u0026amp; Chemicals\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580421079342,"sku":"CRB-KA-1","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2CarbonReserviorCover3.jpg?v=1790571798"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-supercharger-cover","title":"Kawasaki Teryx H2 Carbon Fiber Supercharger Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Supercharger Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber supercharger cover, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/super-charger-kits\"\u003eUTV Supercharger Kits\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580421177646,"sku":"CRB-KA-2","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/CarbonSuperchargerCover2.jpg?v=1790571800"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-air-intake-cover","title":"Kawasaki Teryx H2 Carbon Fiber Air Intake Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Air Intake Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber air intake cover, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003c\/li\u003e\n\u003cli\u003eFits factory \u0026amp; RPM Big Fatty Silicone Intake Tube\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/intake-tubes\"\u003eIntake\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580421243182,"sku":"CRB-KA-3","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/RPM_Kawasaki_H2_Carbon_Fiber_Air_Intake_Cover.jpg?v=1790571802"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-air-filter-lid-cover","title":"Kawasaki Teryx H2 Carbon Fiber Air Filter Lid Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Air Filter Lid Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eUpgrade your Kawasaki H2 with RPM’s gloss carbon fiber air filter lid cover, built to elevate both style and fitment.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true OE replacement, it installs seamlessly using factory hardware and grommets for a precise, hassle-free fit. Crafted from high quality carbon fiber, it delivers a sleek, aggressive finish that complements any performance focused build.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh gloss carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect bolt on design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting components\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA refined detail that brings a sharper edge to your H2.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/filters\"\u003eFilters\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580421341486,"sku":"CRB-KA-4","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/RPM_Kawasaki_H2_Carbon_Fiber_Air_Filter_Lid_Cover.jpg?v=1790571803"},{"product_id":"kawasaki-teryx-h2-carbon-fiber-louvered-cargo-cover","title":"Kawasaki Teryx H2 Carbon Fiber Louvered Cargo Cover","description":"\u003cp\u003e\u003cstrong\u003eKawasaki Teryx H2 Carbon Fiber Louvered Cargo Cover\u003c\/strong\u003e is built for Teryx H2 applications. Review the fitment notes, included components and available options below before ordering.\u003c\/p\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\u003cp\u003eGive your Kawasaki H2 a custom, high-performance look with RPM’s matte carbon fiber Louvered rear bed \/ cargo cover.\u003c\/p\u003e\n\u003cp\u003eIntake air temperatures are the H2’s worst enemy. This Louvered cover redirects airflow from the intercooler and creates a more direct path for hot air to exit the engine bay. By reducing trapped, stagnant heat, especially when the machine is parked, it helps keep intake air cooler and improves overall engine bay airflow.\u003c\/p\u003e\n\u003cp\u003eMade from premium matte carbon fiber, it’s a direct OE replacement that reuses all factory mounting fasteners for a perfect bolt on fit.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium matte carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eDirect OE replacement no modifications needed\u003c\/li\u003e\n\u003cli\u003eReuses factory mounting fasteners \u003c\/li\u003e\n\u003cli\u003eVented \u0026amp; louvered design improves engine bay airflow and reduces heat soak\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClean, aggressive, and actually functional, the perfect upgrade for any serious H2 owner who wants better looks and better performance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Ordering\u003c\/h2\u003e\u003cp\u003eConfirm the vehicle year, model and selected options shown on this page before checkout. Contact R1 Industries if you need help validating compatibility.\u003c\/p\u003e\u003ch2\u003eExplore Related UTV Parts\u003c\/h2\u003e\u003cp\u003eContinue your build with \u003ca href=\"\/collections\/kawasaki-teryx-h2-parts-accessories\"\u003eKawasaki Teryx H2 parts and accessories\u003c\/a\u003e and \u003ca href=\"\/collections\/storage\"\u003eStorage\u003c\/a\u003e.\u003c\/p\u003e","brand":"RPM SXS","offers":[{"title":"Default Title","offer_id":67580421407022,"sku":"CRB-KA-10","price":549.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/H2CarbonFiberVentedFrontCargoCoverFrontMain.png?v=1790571806"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/collections\/H2IntercoolerOverrideHArnessMain.jpg?v=1790661085","url":"https:\/\/r1industriesoffroad.com\/collections\/rpm-sxs-kawasaki-teryx-h2-performance-parts.oembed","provider":"R1 Industries","version":"1.0","type":"link"}