{"product_id":"2026-can-am-defender-hd11-p-drive-s1-clutch-kit","title":"2026 Can-Am Defender HD11 P-Drive S1 Clutch Kit","description":"\u003cp\u003e2026 Can-Am Defender HD11 P-Drive S1 Clutch Kit uses supplier-verified fitment and specifications for the applications listed below.\u003c\/p\u003e\u003ch2\u003eFitment, Features \u0026amp; Contents\u003c\/h2\u003e\u003cp\u003eOur S1 recoil clutch kit for the Defender HD11 P-Drive is budget friendly and packs a huge punch! The factory clutching was very lackluster and feels disconnected from the throttle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit fits 2026 Defender HD11 models with the P-Drive 3 arm primary clutch\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOur S1 recoil clutch kit for the Defender HD11 P-Drive is budget friendly and packs a huge punch! The factory clutching was very lackluster and feels disconnected from the throttle. We did extensive testing and tried many different setups to get everything out of the HD11. Our clutch kit helps pick up RPM quicker and properly transfer the power to the ground. This is a must-have for every Defender!\u003c\/li\u003e \u003cli\u003eNo matter the terrain: On the farm, trail or at the race you’ll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. The machine will hold RPM so you can get where you need to go, and get there faster! Going mudding? Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that’s key to climbing out of that hole. Are you a rock crawler? Our smooth engagement and precise feel down low will give you the confidence to tackle any obstacle.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e2.5 seconds faster\u003c\/strong\u003e when testing 0-60 MPH with just the clutch kit! Tuning is an additional 1 second faster for a total of 3.5 seconds faster 0-60 MPH than stock.\u003c\/li\u003e \u003cli\u003eMassive \u003cstrong\u003e+10 RWHP mid-range\u003c\/strong\u003e gains with a gain of \u003cstrong\u003e+6 RWHP peak\u003c\/strong\u003e over stock clutching.\u003c\/li\u003e \u003cli\u003eWe found removing the primary spring greatly increased tool cost and installation time. The OEM spring works great, so we kept with it for simplicity.\u003c\/li\u003e \u003cli\u003eRecoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.\u003c\/li\u003e \u003cli\u003eKit works for 30 – 35″ Tires\u003c\/li\u003e \u003cli\u003eWe found that the HD11 responds very well to installing 32″ tires, knocking off .8 seconds 0-60 MPH due to the taller gearing provided – these are geared very short from the factory and the taller tires really gives them the legs to run out.\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003e\u003cem\u003eKit Includes:\u003c\/em\u003e\u003c\/strong\u003e Magnet adjustable clutch arms, magnets, stainless steel weight pin removal tool, and our magnet setup sheet.\u003c\/li\u003e \u003cli\u003eA clutch puller is needed if you want to pull the primary clutch to install the clutch weights (not needed, can be done on the vehicle): \u003ca href=\"https:\/\/aftermarketassassins.com\/product\/heavy-duty-primary-clutch-puller-for-can-am\/\"\u003eClutch Puller\u003c\/a\u003e \u003c\/li\u003e \u003cli\u003eWe have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. We know you’ll be extremely pleased with the huge performance gain from this clutch kit!\u003c\/li\u003e \u003cli\u003eSee our HD11 product overview video\u003ca href=\"https:\/\/youtu.be\/RQRrxiMl6hI\"\u003e HERE\u003c\/a\u003e \u003c\/li\u003e \u003cli\u003e\u003cstrong\u003ePart Number: 101-1029\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/aftermarket-assasins\"\u003eAftermarket Assassins products\u003c\/a\u003e and \u003ca href=\"\/pages\/shop-utv-parts-by-model\"\u003eparts by model\u003c\/a\u003e.\u003c\/p\u003e","brand":"Aftermarket Assassins","offers":[{"title":"Default","offer_id":67580803711278,"sku":"101-1029","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0265\/4076\/9342\/files\/aa-1587-1.jpg?v=1790578403","url":"https:\/\/r1industriesoffroad.com\/products\/2026-can-am-defender-hd11-p-drive-s1-clutch-kit","provider":"R1 Industries","version":"1.0","type":"link"}