Can-Am Maverick X3 & Maverick R Fuel Pump Assembly uses supplier-verified fitment and specifications for the applications listed below.

Fitment, Features & Contents

Can be used on 2017 154hp X3 models, 2018-22 120hp X3 models, and 2023+ 135hp X3 models with ECU tuning to match the higher fuel pressure of this pump

Complete pump assembly is ready to drop in

• Direct OEM replacement for 2018-21 Can Am X3 172HP models, 2020+ X3 RR (195 & 200hp) Models, & 2024+ Maverick R (240hp) Models
• Can be used on 2017 154hp X3 models, 2018-22 120hp X3 models, and 2023+ 135hp X3 models with ECU tuning to match the higher fuel pressure of this pump
• Complete pump assembly is ready to drop in the tank
• Replaces OEM part number: 709001057
• High quality fuel pump is compatible with ethanol mixed fuels up to E-85
• High flow design will flow more than OEM but is regulated at the same 64-65psi pressure
• Great replacement if you think/know your factory pump is weak or if your current pump is not working
• Weak fuel pumps normally show a loss of power/peak RPM at wide open throttle. As they worsen, you may have low and mid range stumbling as well. Keep in mind sometimes bad fuel pumps send or allow debris to reach the fuel injector inlet screen and the injectors may also need cleaning or replacing.
• Pump housing is assembled at the AA facility in the USA
• We highly suggest using a flashlight to look in the tank with the OEM pump removed. Make sure you do not have any debris in the tank that would cause new pump failure and clean out the tank if need be.
• Includes HD grounding wire harness. This harness is plug & play and allows us to use a higher amp pump and not cause any ECU faults.
• For proper installation procedure please refer to the service manual and reference our included instructions
• Check out our Fuel Cap Removal Tool for easy removal and installation of the fuel tank retaining ring.
• See instructions HERE **Note instructions are for our replacement pump for the OEM housing ,but go over all the steps needed to install this pump.
• Part Number: 112-1070

Browse Aftermarket Assassins products and parts by model.