R1 Industries • Pleasant Grove, Utah

Dirt Bike Repair in Pleasant Grove

Welcome to R1. We’re a crew of riders and mechanics in Pleasant Grove, Utah.

From a kid’s first trail bike to the bike you race on weekends, there’s room for it in our shop. We mount tires, rebuild forks, service clutches and work on two-stroke and four-stroke engines. Tell us what you ride and what you’d like a hand with.

You’ll find us at 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062. Come say hi at the service counter. There’s plenty of room to pull in with a trailer.

Call 24/7. After-hours shop calls are answered by our concierge support.

Riley Erickson working on a shock in the R1 workshop
Riley Erickson, owner and founder of R1 Industries.

Meet Riley Erickson • Owner & founder

It started with light whips and a garage full of shocks.

Riley Erickson learned to turn wrenches with his dad, a military mechanic. In 2016, Riley started building LED whips in his basement. By 2018, riders were dropping off shocks at his garage. Today, his dad works alongside the crew at our 20,000-square-foot shop in Pleasant Grove.

Between them, our mechanics hold factory certifications from every powersports manufacturer. The tech who works on your bike checks and marks the bolts they reinstall. Then a second mechanic goes over the work before your service writer does the final inspection.

Tell us what happened the last time you rode. A bike that starts first kick in the garage but leaves you kicking it halfway up a trail gives our mechanic a different place to start. Those details matter, especially when the bike runs fine by the time you get it here.

How R1 grew from Riley’s garage
2016

The basement

Riley starts R1 building LED light whips, earning trust through quality and standing behind his work.

2018

The garage

Daily whip pickups and daily shock rebuilds turn his home garage into a busy shop.

2020

The Lindon warehouse

A 5,800-square-foot space makes room for growth. R1 spends five years here and expands into dyno tuning.

Today

Pleasant Grove

A 20,000-square-foot facility, plenty of parking and easy trailer access. Riley is here every day.

Your machine has a spot inside.

Some shops park machines outside between jobs. Once we check in your dirt bike, it stays under our roof. If snow rolls in while we’re waiting on a part, your seat and controls stay out of the weather.

Rows of open- and enclosed-cab UTVs beside the storage racks inside R1’s Pleasant Grove shop.
Looking across the indoor storage floor, from trail machines to full-cab work rigs.
Side-by-sides and ATVs in front of blue service lifts and workbenches at R1 Industries.
The view toward our service bays on the same day.
Technician working on a KTM dirt bike top end at R1 Industries in Pleasant Grove, Utah County.
A KTM top end on the bench at R1.

Does it get harder to start after a ride?

Tell us whether it fires cold and struggles hot. Include the hours you know, when the valves or top end were last serviced, and any work you’ve already done. We can put those details in front of the mechanic before the bike is on the stand.

If an engine check points toward opening the motor, we’ll explain what the first tests showed and what the next inspection will tell us. If you just need a tire mounted before the weekend, say so when you book.

See the work. Know the shop.

Shock and fork rebuilds. Up close.

See a dirt bike fork rebuild and a shock rebuild inside R1. These are two examples of the hands-on repair work our team does. Choose your machine or service above, then tell us what you need.

  1. Watch the dirt bike fork rebuild at R1
  2. Shock rebuild work on the R1 bench.
  3. Step inside our Pleasant Grove facility with Riley.

Swipe to see more of R1.

The R1 standard

Who checks the work before we call?

The mechanic who did the repair, another technician and your service writer each put hands on the machine before pickup.

The technician who did the repair

They inspect their own work, confirm torque and mark every bolt they removed and reinstalled.

A second technician

Another tech rechecks torque, verifies the marks and looks for safety concerns. If something needs attention, the original mechanic corrects it, documents the correction and sends it through tech check again.

Your service writer

They bring the machine out front and make a final check with the torque wrenches kept behind the parts counter. They verify the marks, take photos and record the results. Then they call you to arrange pickup.

What riders say about R1

Want to know who you’re handing your bike to? Read what customers have written about working with our Pleasant Grove crew.

Best of Utah County winner
We’re proud to bring that recognition home to Pleasant Grove. Thank you to the riders who trust us with their machines.

Read our Google reviews

You can read the latest reviews on our Pleasant Grove profile.

Read R1’s Google reviews ↗

Riley on Trail Talk

Red Sands Adventures sat down with Riley to talk about custom builds, fabricating parts and how R1 got started.

Listen to the interview ↗

Your appointment at R1

From the first estimate to the pickup call.

When you bring a machine in, you should know what you’ve agreed to spend and when you’ll hear from us. Here’s how that works in our shop.

Request a repair estimate

Before you load the trailer

Fill out the quote form with your year, model and what’s going on, or call us. A service writer will schedule your appointment and give you the best estimate we can before you come in. We’ll have the paperwork ready when you arrive. Your signature locks in the price for the work on that estimate.

A free 21-point inspection at drop-off

A technician checks the machine within 24 hours. On a dirt bike we check the brakes, steering and wheel bearings, chain and sprockets, air filter and fork legs for leaks. We choose the oil and fluid checks that apply to your two-stroke or four-stroke. The checks apply to the machine in front of us. The tech records what they checked and passes the notes, photos and video to your service writer.

We call within 24 hours of machine drop-off

Your service writer calls and walks you through each finding. We share the photos and video so you can see what the tech sees. If we find play in a wheel bearing, for example, we can show you the movement on video before you decide on the repair. Want a closer look, a measurement or another angle? Ask us. We’ll show you what backs up the recommendation.

We only recommend additional work when we find something that affects safety or reliability. We explain how urgent it is and what it would cost. You decide what to approve, and we document the findings for you either way.

You approve the work and the price

If a finding changes the scope or the price, we get your authorization by text or on a recorded phone call before going ahead. Once you approve, we collect payment for the parts. The repair starts when the parts arrive. Most repairs take 24–48 hours from that point. Diagnostics and more involved jobs can take longer. Your service writer will give you the timeframe for your job.

Pickup and your first ride back

After all three final checks, we call to arrange pickup. If getting here during shop hours is difficult, ask us about an after-hours pickup. We warranty our work. If something feels off when you ride it, call us and tell us what happened. We can pull up the photos and work order and go through it with you.

Request a dirt bike repair estimate

What bike are you bringing in? Give us the year, make, model and hours if you know them. Tell us what changed on your last ride, what you’d like installed or when you’re hoping to race. That gives your service writer a good place to start.

The price you approve is the price you pay for those repairs. If the inspection turns up anything else, we call, show you what we found and explain the cost before you decide.

Prefer to talk it through?

Call 801-899-2520
Text 435-500-9755

Shop hours: Monday–Friday, 9 AM–6 PM Mountain Time.
Call 24/7. After-hours shop calls are answered by our concierge support.

Trouble loading the form? Open it directly in Shopmonkey ↗

Dirt bike repair & service

Dirt bike repairs and maintenance

Start with the problem you are experiencing. We will confirm support for your exact machine and requested work before you bring it in.

Service details & related repairs

Dirt bike repair services

Engine, suspension and tire service for your bike.

You should understand the work before you approve it. Tell us the year, make, model and symptoms; our Pleasant Grove team will confirm support and explain the appropriate repair.

Dirt bike engine repair & diagnostics

Starting and running problems can overlap across fuel, ignition, electrical and engine systems. Send the exact two-stroke or four-stroke bike so we can confirm the requested work and start with diagnosis.

  • Hard-start and no-start concerns involving fuel, spark, compression, electrical faults and valve-train symptoms.
  • Power loss, smoke, oil-use changes and abnormal noise evaluated before internal work is recommended.
  • Overheating investigated alongside cooling, fueling, maintenance and recent engine, intake or exhaust work.
Explore dirt bike engine repair & diagnostics

Dirt bike fork, shock & suspension service

Leaking forks, harshness and bottoming need a suspension inspection that matches the bike and rider’s use. We service supported forks and shocks and diagnose ride-quality concerns.

  • Fork inspection and service for leaks, wear and changes in front-suspension feel.
  • Supported shock inspection and rebuild service, with nitrogen service where applicable.
  • Harshness, softness, bottoming and poor tracking evaluated alongside rider use and recent setup changes.
Explore dirt bike fork, shock & suspension service

Dirt bike tire installation

Tell us the bike, tire brand and size, and whether you need the front, rear or both tires installed. We confirm the tire and wheel setup before the work begins.

  • Removal and installation of compatible front and rear dirt bike tires.
  • Tire, tube and wheel setup confirmed, with the wheel checked for obvious damage during service.
  • Complete-bike or wheel-only drop-off discussed before your visit; mention any related brake, chain or sprocket work.
Explore dirt bike tire installation

Not sure which service fits? Describe what changed, when it happens and any recent work. We will help you start with the right diagnosis.

Our dirt bike repair shop in Utah County

Visit R1 Industries at 2416 W 700 S, Suite 101, Pleasant Grove, Utah 84062. We serve riders and equipment owners from Lehi, American Fork, Orem, Provo, Springville, Spanish Fork and surrounding Utah County communities at this same facility.

Our shop has parking and easy trailer access. Before drop-off, send your year, make, model and symptoms so our team can confirm supported work and current scheduling. Call 801-899-2520 or request a repair quote.

What does a weekend on your bike look like?

Ten laps on a motocross track ask different things of a bike than an afternoon of first-gear switchbacks.

Motocross and race prep

If the rear shock starts kicking on braking bumps late in a moto, tell us which end of the bike moves and when. We check the linkage and suspension and talk through spring rate and setup for your weight. Coming in before a race? Send the date so we can plan tires, chain and sprockets, brake pads and any engine work around it.

Trail and enduro bikes

A clutch that drags on a tight uphill can make an otherwise good bike exhausting to ride. We check the adjustment or hydraulic actuation for your model, then work inward if the findings call for it. We also install trail upgrades like handguards, skid plates and radiator guards. Tell us which parts you already have.

Two-stroke and four-stroke engines

On a two-stroke that’s lost its snap, piston and ring condition, reeds, fueling and air leaks can all matter. On a four-stroke that’s hard to restart hot, valve clearance is one part of the picture. We explain what the tests show and call you with the price before opening the engine for additional work.

See our dirt bike engine repair service

Youth bikes and first trail rides

If a bike has sat since last summer or changed hands between kids, tell us. We can check fuel delivery, make sure the controls move freely and inspect the brakes and tires. Bring up anything your rider finds hard to reach or operate so we can look at it together.

Engine, clutch and suspension work for dirt bikes

Hard starting and top-end diagnosis

Include whether the bike is a two-stroke or four-stroke, its hours and how it starts cold versus after a ride. We use that history to plan the initial fuel, ignition or mechanical checks. If opening the engine is the next step, we explain what we need to inspect and get your approval.

Clutch drag or slipping under load

Does the bike creep with the lever pulled in, or does the engine rev without the same pull at the wheel? Tell us if the lever feel changed after a cable, lever or hydraulic repair. That helps separate a control issue from wear inside the clutch.

Fork leaks and front-end feel

Oil at one fork leg, harshness on braking bumps and bottoming on landings are worth describing separately. Use the fork service page for seal and bushing inspection, loose-leg drop-off and rebuild questions.

Gloved hands inspecting the exposed internals of a KTM dirt bike engine
An opened KTM engine at the R1 repair bench.

Dirt bikes we work on

Two bikes with the same engine size can use different parts. Include the full model name and year in your quote request, especially on a bike with an engine swap or suspension conversion. Looking for parts by model? Browse dirt bike parts by make and model.

Motocross and cross-country race bikes

Yamaha YZ and YZ-F, Honda CR and CRF-R, Kawasaki KX and KX-X, Suzuki RM and RM-Z, KTM SX and SX-F, Husqvarna TC and FC, and GASGAS MC and MC-F families.

Trail, enduro and woods bikes

Yamaha WR and YZ-X, Honda CRF-X, CRF-RX and CRF-F, Kawasaki KLX, KTM XC, XC-W and EXC-F, Husqvarna TE and FE, GASGAS EC, and Beta RR. Tell us about any gearing, fuel system or suspension changes.

Youth bikes, minis and play bikes

Yamaha PW50, TT-R and YZ65/85, Honda CRF50F and CRF110F, Kawasaki KLX110 and KX65/85, Suzuki DR-Z125, and KTM 50, 65 and 85 SX. For an older bike, we’ll check parts availability when we build the estimate.

Plan your repair

Dirt bike repair questions.

Choose the service that fits your symptoms and get ready for your visit to R1.

What dirt bike repairs do you handle?

We diagnose hard-starting and no-start problems, carburetor and EFI issues, compression and engine concerns, clutch and drivetrain problems, electrical faults and brake issues. We also handle fork and shock service, tires and routine maintenance for supported bikes.

Which dirt bike brands can you service?

We work on supported Honda, Yamaha, Kawasaki, Suzuki, KTM, Husqvarna, GasGas and other dirt bike applications. Send the year, make and model, plus any engine or suspension changes, so we can confirm service before drop-off.

Can you diagnose a dirt bike that will not start or loses power?

Yes. Our dirt bike engine repair and diagnostics covers starting, running, fuel delivery, ignition and compression concerns. Tell us whether the problem happens cold, hot or under load and include any recent repairs.

Do you replace fork seals and rebuild dirt bike suspension?

Yes. See our dirt bike fork, shock and suspension service for leaking forks, shock service, harshness and bottoming concerns. We offer local drop-off and mail-in suspension service for supported components.

Can you install dirt bike tires and inspect the wheels?

Yes. Our dirt bike tire installation service covers supported front and rear applications. Tell us whether you are bringing loose wheels or the complete bike, and describe any rim, spoke or tube concerns.

Do you offer maintenance before a trail ride or race?

We handle supported oil, filter, fluid, chain, sprocket, brake and general maintenance work. Tell us how you ride, any known issues and your planned ride date so we can discuss the service scope and current availability.

Where is your dirt bike repair shop?

R1 Industries is at 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062. We serve dirt bike and motocross riders from American Fork, Lehi, Lindon, Orem, Provo and surrounding Utah County communities. Shop hours are Monday–Friday, 9 AM–6 PM Mountain Time.

How do I get a repair estimate?

Use the dirt bike repair quote form or text 435-500-9755. Include the year, make, model, symptoms, recent work and helpful photos or video. Pricing and turnaround depend on diagnosis, parts availability and the current schedule.

Pleasant Grove, Utah

Drop-off and pickup

Visit R1 Industries Offroad in Pleasant Grove, Utah.

Find us at 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062. Our 20,000-square-foot facility has plenty of parking and easy trailer access.

Bringing your dirt bike to Pleasant Grove

Our shop is in Pleasant Grove, Utah County, near American Fork, Lindon, Lehi, Orem and Provo. Coming down from Draper, Sandy, South Jordan or Salt Lake City in Salt Lake County? Call before you load up. For a fork rebuild or tire change, we’ll let you know whether to bring the whole bike, the fork legs or just a wheel.

After-hours key drop

Call or text to arrange where to park. Our lot has room to unload and turn a trailer. Once you’ve parked, if your bike has a key, leave it in the drop box on the west side of the building. For an after-hours pickup, arrange it with your service writer before we close.

Monday–Friday, 9 a.m.–6 p.m. Mountain time.

Front entrance of R1 Industries in Pleasant Grove
The front entrance at 2416 W 700 S, Suite 101.

Let’s get your dirt bike working right.

Request a quote

R1 Industries • Pleasant Grove

See the work inside R1.

Step inside the shop. Watch our team work on UTVs, ATVs and dirt bike suspension.