UHD Tie Rod Kit for RZR Pro XP 2020+ / Polaris XP PRO Platform 64"
UHD Tie Rod Kit for RZR Pro XP 2020+ / Polaris XP PRO Platform 64&q...
UHD Tie Rod Kit for RZR Pro XP 2020+ / Polaris XP PRO Platform 64" from DRT Motorsports is built for the applications listed in the product information below. Explore the features, specifications and available options for your build.
RZRPROXP | Polaris RZR Pro XP 2020+ Tie Rod Kit 64"
PART# 20010TR06201
DRT Motorsports UHD (AL-7075) Tie Rod Kit for the 2020+ Polaris PRO XP Platform (64") is designed to strengthen and add reliability to this potent powerplant.
Made of 7 Series (UHD – Ultra Heavy Duty) 7075 billet bar stock, the DRT Pro XP tie rods are much stronger than standard 6061, lighter in weight, and able to be machined to a smaller diameter without sacrificing strength in order to clear all components through the entire range of motion. Even at full droop or compression, this tie rod set will clear all suspension and steering components at any point in the steering range so you can ride with confidence.
They work in conjunction with the OEM steering rack part number 1824946 and replace the OEM Rod Ends part numbers 7061257 and 7061258. We use 3-piece PTFE lined 5/8" Chromoly rod ends and our proprietary inner ball joint to provide sealing of the OEM bellow and protect the steering rack from the intrusion of water, dirt, and sand. DRT spec stainless steel misalignment spacers and class 10.9 hardware is used to provide the required clamping force to keep you on the trail.
The DRT Tie Rods are finished in Military Grade anodized black and marked with the DRT Motorsports; proudly made in the USA.
Note: Verify jam nuts are tight and installed with tread locker. The use of paint check to visually verify movement is recommended. Jam nuts should be inspected before each ride to make sure everything is tight and secure. These radius rods are Left/Right adjustable.
- Designed for Polaris RZR Pro XP/4 (64") application
- Machined from aerospace grade 7 series 7075-T6 aluminum
- Military Specification Anodized finish
- Laser engraved branding
- 3 pieces PTFE lined Left/Right hand 5/8" Chromoly rod ends
- Machined wrench notch areas for adjustability
- 303 Stainless Steel rod end spacers
- Made in the USA
2020+ Polaris
RZR Pro XP, 2 and 4 door models
Shop more DRT Motorsports UTV parts and accessories from R1 Industries.
Browse more DRT Motorsports UTV suspension parts.
Quick Answers Before You Order
Which RZR Pro XP models are listed?
This kit is listed for 2020+ Polaris RZR Pro XP and Pro XP 4 models on the 64-inch platform.
What are the tie rods made from?
The rods are machined from 7075-T6 aluminum bar stock and finished in anodized black.
Which factory steering parts are referenced?
The product information lists compatibility with OEM steering rack 1824946 and replacement of OEM rod ends 7061257 and 7061258.
How is the steering rack protected?
DRT uses a proprietary inner ball joint designed to seal against the OEM bellow, along with PTFE-lined 5/8-inch chromoly rod ends, stainless-steel spacers, and class 10.9 hardware.
What adjustment and maintenance are required?
The left- and right-hand ends are adjustable. DRT directs the installer to apply thread locker, tighten the jam nuts, and inspect them before each ride.
Compare the Pro XP quick-camber upper radius rods or browse DRT Pro XP suspension parts.
Shipping & Returns
Shipping details are shown at checkout. Review our shipping and return policies for complete information.
UHD Tie Rod Kit for RZR Pro XP 2020+ / Polaris XP PRO Platform 64"
DRT Motorsportscheckout
returns
support
Descripción
Descripción
UHD Tie Rod Kit for RZR Pro XP 2020+ / Polaris XP PRO Platform 64" from DRT Motorsports is built for the applications listed in the product information below. Explore the features, specifications and available options for your build.
RZRPROXP | Polaris RZR Pro XP 2020+ Tie Rod Kit 64"
PART# 20010TR06201
DRT Motorsports UHD (AL-7075) Tie Rod Kit for the 2020+ Polaris PRO XP Platform (64") is designed to strengthen and add reliability to this potent powerplant.
Made of 7 Series (UHD – Ultra Heavy Duty) 7075 billet bar stock, the DRT Pro XP tie rods are much stronger than standard 6061, lighter in weight, and able to be machined to a smaller diameter without sacrificing strength in order to clear all components through the entire range of motion. Even at full droop or compression, this tie rod set will clear all suspension and steering components at any point in the steering range so you can ride with confidence.
They work in conjunction with the OEM steering rack part number 1824946 and replace the OEM Rod Ends part numbers 7061257 and 7061258. We use 3-piece PTFE lined 5/8" Chromoly rod ends and our proprietary inner ball joint to provide sealing of the OEM bellow and protect the steering rack from the intrusion of water, dirt, and sand. DRT spec stainless steel misalignment spacers and class 10.9 hardware is used to provide the required clamping force to keep you on the trail.
The DRT Tie Rods are finished in Military Grade anodized black and marked with the DRT Motorsports; proudly made in the USA.
Note: Verify jam nuts are tight and installed with tread locker. The use of paint check to visually verify movement is recommended. Jam nuts should be inspected before each ride to make sure everything is tight and secure. These radius rods are Left/Right adjustable.
- Designed for Polaris RZR Pro XP/4 (64") application
- Machined from aerospace grade 7 series 7075-T6 aluminum
- Military Specification Anodized finish
- Laser engraved branding
- 3 pieces PTFE lined Left/Right hand 5/8" Chromoly rod ends
- Machined wrench notch areas for adjustability
- 303 Stainless Steel rod end spacers
- Made in the USA
2020+ Polaris
RZR Pro XP, 2 and 4 door models
Shop more DRT Motorsports UTV parts and accessories from R1 Industries.
Browse more DRT Motorsports UTV suspension parts.
Quick Answers Before You Order
Which RZR Pro XP models are listed?
This kit is listed for 2020+ Polaris RZR Pro XP and Pro XP 4 models on the 64-inch platform.
What are the tie rods made from?
The rods are machined from 7075-T6 aluminum bar stock and finished in anodized black.
Which factory steering parts are referenced?
The product information lists compatibility with OEM steering rack 1824946 and replacement of OEM rod ends 7061257 and 7061258.
How is the steering rack protected?
DRT uses a proprietary inner ball joint designed to seal against the OEM bellow, along with PTFE-lined 5/8-inch chromoly rod ends, stainless-steel spacers, and class 10.9 hardware.
What adjustment and maintenance are required?
The left- and right-hand ends are adjustable. DRT directs the installer to apply thread locker, tighten the jam nuts, and inspect them before each ride.
Compare the Pro XP quick-camber upper radius rods or browse DRT Pro XP suspension parts.
Reseñas
Reseñas
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Make sure it fits. Make sure it works.
Need help with this part?
R1 Industries can help confirm product fitment, compare options and arrange professional installation or repair.
