Polaris General Skid Plate Kit

While your General XP 1000 came equipped with what the manufacturer might refer to as a “skid plate”, it’s really nothing more than a very thin piece of plastic that offers minimum protection for your fuel tank, battery, parts of your transmission, and (if you’re lucky) a small portion of the front and rear differentials.

Don’t take a chance with these crucial components, protect your investment and extend the life of your UTV with better undercarriage protection—demand a Seizmik UHMW Skid Plate & Rock Sliders Kit and tackle the trails knowing that your undercarriage is protected from unwanted damage.

Manufactured at our facility in Cairo, GA, our plates are precision cut and bent from 1/2” thick Ultra High Molecular Weight (UHMW) polyethylene sheets, offering our skid plates and rock sliders superior strength to the stock OEM or an aftermarket aluminum skid plate.

The 1/2” thick UHMW features impressive resistance to denting, gouging, and rusting caused by blunt edge impacts or sliding over obstacles.

A typical OEM plate’s material has a tensile strength of roughly 4500 PSI, while Seizmik’s UHMW material has a tensile strength of 7010 PSI.  And Seizmik’s plates are 4x thicker than the average OEM plate.

Our kits also include side panels to serve as tree kickers and rock sliders, offering protection to your vehicle’s rocker panels.

Easy to handle sections piece together to cover the entire undercarriage of the vehicle, including the front and rear differentials.  The corrosion resistant mounting hardware is recessed below the plate’s surface, protecting the fasteners from damage.

Installation is made easier with less drilling required thanks to the use of existing OEM mounting points and glass filled nylon frame clamps with brass inserts (used where possible).

Maintenance access points make routine servicing easier—no need to drop the plate to change out fluids.

Like to spend some time in the mud? Not a problem! Our plates come with more drain holes strategically placed for quicker clean up. There is no need to drop the plate in order to clean the bottom of your UTV.

Features:

• ½” UHMW CONSTRUCTION—Offering superior resistance to denting, rusting and gouging caused by blunt edge impacts or sliding over obstacles
• LOW FRICTION/HIGH ABRASION RESISTANCE/SELF LUBRICATING PROPERTIES—Making UHMW an excellent choice for sliding across hard surfaces
• INTEGRATED ROCK SLIDERS/TREE KICKERS—For added rocker panel protection
• THICKER AND STRONGER MATERIAL—Nearly 4x thicker with roughly 56% more tensile strength than the typical stock OEM plate
• LESS DRILLING—For shorter & easier installation with the use of Glass Filled Nylon Frame Clamps with Brass Inserts and Existing OEM Mounting Points where possible
• EASIER MAINTENANCE—Maintenance Access Points are cut where needed making vehicle maintenance easier
• EASIER CLEAN UP—More drain holes for quicker/easier clean outs
• FENDER FLARE COMPATIBLE—Works with SEIZMIK Fender Flare Kits
• MADE IN THE USA—Manufactured at our facility in Cairo, GA

VEHICLE FITMENT

Polaris General

INSTALLATION

Instructions

VIDEOS