★★★★★5.0(RZR Turbo Riders)
94% Dust Separation • Ram Air Design • Whisper-Quiet Fan • 1.5hr Install • 2.4A Max Draw
94% of Dust Stopped Before It Reaches Your Filter. The S&B Roll Bar Separator for the RZR XP Turbo & Turbo S.
The Polaris RZR XP Turbo and Turbo S are built for aggressive terrain — which means they're constantly pulling in dust-laden air. The S&B Roll Bar Particle Separator mounts to your roll bar and uses a ram air design to centrifugally separate 94% of dust and debris before it ever reaches your air filter. A whisper-quiet fan evacuates the separated particles. Installs in about 1.5 hours. Fits all 2016+ RZR XP Turbo and Turbo S models.
What's Included
✓
Roll Bar Particle Separator
Ram air centrifugal design
✓
Whisper-Quiet Evacuation Fan
2.4A max draw
✓
Roll Bar Mounting Hardware
Fits RZR Turbo & Turbo S cage
✓
Full Wiring Kit & Instructions
~1.5hr install time
Why RZR Turbo Riders Choose the S&B Roll Bar Separator
🌪️
94% dust separation — before it reaches your filter
Centrifugal separation removes 94% of dust and debris from the airstream before it ever contacts your air filter. Your filter stays cleaner, your engine stays protected.
💨
Ram air design — uses vehicle speed to pull air in
The roll bar mount position takes advantage of ram air pressure as you move. More speed = more airflow through the separator.
🔇
Whisper-quiet fan — 2.4A max draw
The evacuation fan is nearly silent and draws minimal power. You won't notice it running.
⏱️
~1.5 hour install
Full hardware and wiring kit included. Most riders complete the install in about 1.5 hours with basic hand tools.
📋
Fits RZR XP Turbo & Turbo S (2016+)
Covers all trim levels of the RZR XP Turbo and Turbo S from 2016 through current production.
🛡️
Works upstream of your existing air filter
The separator is a pre-filter system. Your existing air filter stays in place — the separator adds a layer of protection in front of it.
🏆
From S&B Filters — the filtration standard for UTVs
S&B's particle separators are among the most proven in the UTV market, trusted by desert racers and trail riders across the country.
Tracking
Sent When Shipped
Confirmation
Sent Immediately
Although rare, some delays may occur. We'll keep you updated every step of the way.
With Separator vs. Without
No Particle Separator
✕All dust hits your air filter directly
✕Filter clogs faster in dusty conditions
✕More frequent cleaning required
✕Higher engine contamination risk
✕Airflow drops as filter loads up
⚡ S&B Roll Bar Separator
✓94% of dust removed before the filter
✓Filter stays cleaner, longer
✓Fewer cleanings needed
✓Better engine protection
✓Ram air design boosts airflow at speed
What Riders Say
★★★★★
"My Turbo S eats dust on every desert run. The S&B separator has made a massive difference — my filter barely needs cleaning now."
Jason M. — Polaris RZR XP Turbo S
★★★★★
"Installed in about an hour and a half. Fan is dead quiet. Best protection upgrade I've done for my Turbo."
Rachel K. — Polaris RZR XP Turbo
★★★★★
"You can literally see the dust collected in the separator after a ride. It works exactly as advertised."
Mike T. — Polaris RZR XP Turbo S
Vehicle Fitment
Polaris RZR XP Turbo (2016+)
All trim levels
Polaris RZR XP Turbo S (2018+)
All trim levels
Quick Answers
Does this replace my air filter?
No — it works upstream of your existing air filter as a pre-filter system. Your air filter stays in place.
Will this fit my Turbo S?
Yes — fits both the RZR XP Turbo (2016+) and Turbo S (2018+).
How long does installation take?
About 1.5 hours with basic hand tools. Full hardware and wiring kit included.
How fast does it ship?
In stock and ships fast. Tracking info sent as soon as your order is on its way.
Stop the Dust Before It Starts. The S&B Roll Bar Separator Is the Best Protection Upgrade for Your RZR XP Turbo.
In stock. Ships fast. 94% dust separation — fits Polaris RZR XP Turbo & Turbo S (2016+).
