1
of
8
Loading...
SuperATV Polaris RZR Turbo R 4 Rhino Driveline Prop Shaft
Sale priceFrom
$48236
Regular price
$53595
Unit price
10% OFF
1 / 8
1 / 8
Rhino driveline for the 2022–2024 RZR Turbo R 4
Choose the shaft section you need: front, middle, rear or a listed combination. Check the carrier-bearing choice for that section. Where a bearing is required, “Use Existing” applies only to a compatible SuperATV carrier bearing.
SuperATV application details and installation resources.
Shaft construction
The Toughest Prop Shaft You Can Get
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Features
Rhino Driveline Shaft:
C-Series:
- Shaft diameter is .5" larger than stock
- Shaft wall is .120" vs stock's .088"
- Made of 4130 chromoly tubing (stock is plain carbon steel)
C-Series:
- Uses a strong and versatile CV joint
- Made of 4130 chromoly steel
- Sealed for any riding environment
- No vibrations, no wobble, no maintenance
Fitment
- Polaris RZR Turbo R 4 : 2022-2024
NOTE: Compatible with SuperATV carrier bearings only.
Replaces OEM Part #s: 1334415, 1334063, 1334601, 1334198, 1334062, and 1337153
Vehicle Fitment
Polaris RZR Turbo R 4 (four seats), 2022–2024. Confirm the shaft position and carrier-bearing selection before ordering.
Shipping & Returns
Shipping is calculated at checkout. For complete details, review our shipping and return policies.
SuperATV Polaris RZR Turbo R 4 Rhino Driveline Prop Shaft
$730.71
$811.90
10% OFF
Rhino driveline for the 2022–2024 RZR Turbo R 4
Choose the shaft section you need: front, middle, rear or a listed combination. Check the carrier-bearing choice for that section. Where a bearing is required, “Use Existing” applies only to a compatible SuperATV carrier bearing.
SuperATV application details and installation resources.
Shaft construction
The Toughest Prop Shaft You Can Get
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Features
Rhino Driveline Shaft:
C-Series:
- Shaft diameter is .5" larger than stock
- Shaft wall is .120" vs stock's .088"
- Made of 4130 chromoly tubing (stock is plain carbon steel)
C-Series:
- Uses a strong and versatile CV joint
- Made of 4130 chromoly steel
- Sealed for any riding environment
- No vibrations, no wobble, no maintenance
Fitment
- Polaris RZR Turbo R 4 : 2022-2024
NOTE: Compatible with SuperATV carrier bearings only.
Replaces OEM Part #s: 1334415, 1334063, 1334601, 1334198, 1334062, and 1337153
Vehicle Fitment
Polaris RZR Turbo R 4 (four seats), 2022–2024. Confirm the shaft position and carrier-bearing selection before ordering.
Shipping & Returns
Shipping details are shown at checkout. Review our shipping and return policies for complete information.
Description
Description
Rhino driveline for the 2022–2024 RZR Turbo R 4
Choose the shaft section you need: front, middle, rear or a listed combination. Check the carrier-bearing choice for that section. Where a bearing is required, “Use Existing” applies only to a compatible SuperATV carrier bearing.
SuperATV application details and installation resources.
Shaft construction
The Toughest Prop Shaft You Can Get
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
Your Polaris RZR Turbo R is almost built for battle, but not quite. If you push it too hard, you can wad up your drive shaft. Forget that! Upgrade or replace your stock shaft with SuperATV's Heavy-Duty Rhino Driveline Prop Shaft. It gives you a bigger shaft with tougher C-series CV joints. If you want the most reliable UTV, you need Rhino Driveline.
Superior Construction
We built Rhino Driveline prop shafts with .120" tube walls and a 1.75" diameter tube. That's bigger and thicker than your OEM prop shaft. It's also made of chromoly steel alloy, unlike your OEM carbon steel prop shaft. That makes it strong enough to take on creeks, rocks, mud, and hills. It's built for the way you ride.
C-Series
The C-Series prop shaft gives you ultimate strength and protection. It uses a CV joint built with a chromoly cage, spider, and cup, just like an axle, for superior strength. The high-quality boot keeps out mud, water, and dirt. The constant velocity of the CV means no rattle, wobble, or balance issues are possible. It's the ultimate joint and the smart choice for any ride style.
Carrier Bearing
Rhino Driveline Prop Shafts are compatible with SuperATV Carrier Bearings only. Don't worry, they're the best you can get, and you can save when you bundle one with your Rhino Driveline Prop Shaft.
Our Heavy-Duty Carrier Bearings make maintenance and installation a breeze with a greaseable, self-aligning bearing and a two-piece cast or billet aluminum design.
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Features
Rhino Driveline Shaft:
C-Series:
- Shaft diameter is .5" larger than stock
- Shaft wall is .120" vs stock's .088"
- Made of 4130 chromoly tubing (stock is plain carbon steel)
C-Series:
- Uses a strong and versatile CV joint
- Made of 4130 chromoly steel
- Sealed for any riding environment
- No vibrations, no wobble, no maintenance
Fitment
- Polaris RZR Turbo R 4 : 2022-2024
NOTE: Compatible with SuperATV carrier bearings only.
Replaces OEM Part #s: 1334415, 1334063, 1334601, 1334198, 1334062, and 1337153
Vehicle Fitment
Polaris RZR Turbo R 4 (four seats), 2022–2024. Confirm the shaft position and carrier-bearing selection before ordering.
Reviews
Reviews
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Fitment helpCall 801-899-2520 before ordering
Secure checkoutMultiple trusted payment options
Professional installationAvailable in Pleasant Grove, Utah
Make sure it fits. Make sure it works.
Need help with this part?
R1 Industries can help confirm product fitment, compare options and arrange professional installation or repair.
