R1 Industries Pro Series LED Light Whips (Pair)
R1 Industries Pro Series LED Light Whips (Pair)
R1 Industries · Pro Series
Find your crew after dark.
Give your rig a color your riding buddies can pick out across the dunes. Each pair of Pro Series RGBW LED whips comes with a dedicated white channel, a remote for quick color changes, and push-and-twist bases for loading up at the end of the ride.
We hand-assemble these whips at R1 and back them with our lifetime warranty for the original purchaser.
Lifetime warranty on your Pro Series whips
Break a whip on a dune ride? Have a section of LEDs stop lighting up? As the original purchaser, you can come straight to the R1 crew for help for as long as you own your whips.
How to start a claim. Email R1 for a warranty form. Tell us which whips you have and what happened. Keep the pair together and wait for the form before shipping. Our team can confirm which items to return and any charges that apply.
Local to Utah? Bring the requested items and completed form to R1 Industries, 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062.
Choose your length
How much whip do you want above the cage?
- 4-foot Pro Series
- The tallest pair on this page. Choose it for extra height when you have the overhead clearance. Two flags are included.
- 3-foot Pro Series
- A foot shorter than the 4-foot pair, with the same controls and two included flags.
- 2-foot Fatty
- A short, wide pair for a lower profile. Flags come with the pair. This model uses compatible 2-inch Fatty flag clips.
Measure up from your planned mounting point. Check the roof, rear window and trailer door. The whips detach for transport.
Inside the box
One kit runs both whips.
- Two RGBW LED whips and two quick-release bases
- Bluetooth controller and handheld RF remote
- Dual-whip wiring harness and dash rocker switch
- Flags with every pair, including the 2-foot Fatty
Watch the 4-foot kit unboxing · Watch the 2-foot Fatty unboxing
Choose your mounts
Match the mounts to your machine.
- Using an existing whip mounting point?
- The kit includes quick-release bases. Confirm your mounting surface and wiring clearance before ordering.
- Want more flex at the base?
- Add the optional spring mount pair.
- Mounting directly to round cage tubing?
- Measure the tube’s outside diameter. Select the matching roll-bar clamp pair in 1.75, 1.875 or 2 inches. You can select springs and clamps together.
Riley’s whip test
Watch what happens on pavement.
Riley takes the whip outside the shop for a drag and impact test. You can see the whip hit pavement, then watch the forklift and press footage in the same cut.
R1 Industries · Since 2015
Hand-assembled at R1.
Riley started building whips with friends in his basement in 2015, soldering every plug by hand. We still assemble our whips at R1 and use USA-made UV-resistant clear heat shrink.
Controls, wiring and installation
How do I change colors?
Use the included RF remote without a phone, or use the PRO RGB app for colors, patterns, brightness and effect speed. The dedicated white LED channel gives you a separate white setting. Make adjustments while parked.
What power and mounting clearance do I need?
The whips use 12V DC and have an IP67 protection rating. Confirm your mounting point and wiring route. The electrical plug disconnects separately from the push-and-twist mechanical base.
Shipping & Returns
Shipping is calculated at checkout. For complete details, review our shipping and return policies.
R1 Industries Pro Series LED Light Whips (Pair)
R1 Industries · Pro Series
Find your crew after dark.
Give your rig a color your riding buddies can pick out across the dunes. Each pair of Pro Series RGBW LED whips comes with a dedicated white channel, a remote for quick color changes, and push-and-twist bases for loading up at the end of the ride.
We hand-assemble these whips at R1 and back them with our lifetime warranty for the original purchaser.
Lifetime warranty on your Pro Series whips
Break a whip on a dune ride? Have a section of LEDs stop lighting up? As the original purchaser, you can come straight to the R1 crew for help for as long as you own your whips.
How to start a claim. Email R1 for a warranty form. Tell us which whips you have and what happened. Keep the pair together and wait for the form before shipping. Our team can confirm which items to return and any charges that apply.
Local to Utah? Bring the requested items and completed form to R1 Industries, 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062.
Choose your length
How much whip do you want above the cage?
- 4-foot Pro Series
- The tallest pair on this page. Choose it for extra height when you have the overhead clearance. Two flags are included.
- 3-foot Pro Series
- A foot shorter than the 4-foot pair, with the same controls and two included flags.
- 2-foot Fatty
- A short, wide pair for a lower profile. Flags come with the pair. This model uses compatible 2-inch Fatty flag clips.
Measure up from your planned mounting point. Check the roof, rear window and trailer door. The whips detach for transport.
Inside the box
One kit runs both whips.
- Two RGBW LED whips and two quick-release bases
- Bluetooth controller and handheld RF remote
- Dual-whip wiring harness and dash rocker switch
- Flags with every pair, including the 2-foot Fatty
Watch the 4-foot kit unboxing · Watch the 2-foot Fatty unboxing
Choose your mounts
Match the mounts to your machine.
- Using an existing whip mounting point?
- The kit includes quick-release bases. Confirm your mounting surface and wiring clearance before ordering.
- Want more flex at the base?
- Add the optional spring mount pair.
- Mounting directly to round cage tubing?
- Measure the tube’s outside diameter. Select the matching roll-bar clamp pair in 1.75, 1.875 or 2 inches. You can select springs and clamps together.
Riley’s whip test
Watch what happens on pavement.
Riley takes the whip outside the shop for a drag and impact test. You can see the whip hit pavement, then watch the forklift and press footage in the same cut.
R1 Industries · Since 2015
Hand-assembled at R1.
Riley started building whips with friends in his basement in 2015, soldering every plug by hand. We still assemble our whips at R1 and use USA-made UV-resistant clear heat shrink.
Controls, wiring and installation
How do I change colors?
Use the included RF remote without a phone, or use the PRO RGB app for colors, patterns, brightness and effect speed. The dedicated white LED channel gives you a separate white setting. Make adjustments while parked.
What power and mounting clearance do I need?
The whips use 12V DC and have an IP67 protection rating. Confirm your mounting point and wiring route. The electrical plug disconnects separately from the push-and-twist mechanical base.
Shipping & Returns
Shipping details are shown at checkout. Review our shipping and return policies for complete information.
Description
Description
R1 Industries · Pro Series
Find your crew after dark.
Give your rig a color your riding buddies can pick out across the dunes. Each pair of Pro Series RGBW LED whips comes with a dedicated white channel, a remote for quick color changes, and push-and-twist bases for loading up at the end of the ride.
We hand-assemble these whips at R1 and back them with our lifetime warranty for the original purchaser.
Lifetime warranty on your Pro Series whips
Break a whip on a dune ride? Have a section of LEDs stop lighting up? As the original purchaser, you can come straight to the R1 crew for help for as long as you own your whips.
How to start a claim. Email R1 for a warranty form. Tell us which whips you have and what happened. Keep the pair together and wait for the form before shipping. Our team can confirm which items to return and any charges that apply.
Local to Utah? Bring the requested items and completed form to R1 Industries, 2416 W 700 S, Suite 101, Pleasant Grove, UT 84062.
Choose your length
How much whip do you want above the cage?
- 4-foot Pro Series
- The tallest pair on this page. Choose it for extra height when you have the overhead clearance. Two flags are included.
- 3-foot Pro Series
- A foot shorter than the 4-foot pair, with the same controls and two included flags.
- 2-foot Fatty
- A short, wide pair for a lower profile. Flags come with the pair. This model uses compatible 2-inch Fatty flag clips.
Measure up from your planned mounting point. Check the roof, rear window and trailer door. The whips detach for transport.
Inside the box
One kit runs both whips.
- Two RGBW LED whips and two quick-release bases
- Bluetooth controller and handheld RF remote
- Dual-whip wiring harness and dash rocker switch
- Flags with every pair, including the 2-foot Fatty
Watch the 4-foot kit unboxing · Watch the 2-foot Fatty unboxing
Choose your mounts
Match the mounts to your machine.
- Using an existing whip mounting point?
- The kit includes quick-release bases. Confirm your mounting surface and wiring clearance before ordering.
- Want more flex at the base?
- Add the optional spring mount pair.
- Mounting directly to round cage tubing?
- Measure the tube’s outside diameter. Select the matching roll-bar clamp pair in 1.75, 1.875 or 2 inches. You can select springs and clamps together.
Riley’s whip test
Watch what happens on pavement.
Riley takes the whip outside the shop for a drag and impact test. You can see the whip hit pavement, then watch the forklift and press footage in the same cut.
R1 Industries · Since 2015
Hand-assembled at R1.
Riley started building whips with friends in his basement in 2015, soldering every plug by hand. We still assemble our whips at R1 and use USA-made UV-resistant clear heat shrink.
Controls, wiring and installation
How do I change colors?
Use the included RF remote without a phone, or use the PRO RGB app for colors, patterns, brightness and effect speed. The dedicated white LED channel gives you a separate white setting. Make adjustments while parked.
What power and mounting clearance do I need?
The whips use 12V DC and have an IP67 protection rating. Confirm your mounting point and wiring route. The electrical plug disconnects separately from the push-and-twist mechanical base.
Reviews
Reviews
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Make sure it fits. Make sure it works.
Need help with this part?
R1 Industries can help confirm product fitment, compare options and arrange professional installation or repair.
