UTV Mountain Accessories | SKU: RZR900/1000TRAILBENCH

UTVMA Polaris RZR 900/1000 Front or Rear Bench Seat with Harnesses

$1,275⁰⁰

Shipping calculated at checkout.

UTVMA Polaris RZR 900/1000 Front or Rear Bench Seat with Harnesses - All Black / Auto Buckle (Black) is backordered and will ship as soon as it is back in stock.

Secure checkoutFitment help Clear returns

Description

One bench for three seating positions—without deleting the console

Add a center rider while keeping the stock legroom

This UTV Mountain Accessories over-the-console bench replaces two separate seats with one three-position setup in compatible non-Pro Polaris RZR models. It includes three four-point harnesses and mounts to the required factory RZR base plate with no drilling or cutting.

Front or rear placementThree 4-point harnessesNo console-delete kitAbout 60-minute install

What changes after the install

Add a center seating positionThe over-the-console design creates three defined seating and restraint positions where the compatible RZR originally carries two seats.

Keep the same legroomThe manufacturer states that the bench neither adds nor removes legroom compared with the stock seating layout.

Gain about two inches of heightThe bench raises the seating position approximately two inches, which can improve forward visibility for a properly fitted shorter occupant.

Make cleanup easierRemovable bottom cushions help with drainage, washing and access to the factory base plate underneath.

UTV Mountain Accessories three-position bench installed in a Polaris RZR

What is included—and what must already be in your RZR

Bench	One UTVMA all-weather vinyl bench with removable bottom cushions
Harnesses	Three UTVMA four-point harnesses with sewn-in pads and chest buckles
Hardware	Bench mounting hardware and instructions included
Required factory part	The stock RZR seat base plate is required and is not included
Console treatment	The bench fits over the console; a console-delete kit is not needed
Installation	Approximately 60 minutes; no drilling or cutting required
Warranty	One-year manufacturer warranty against defects in materials and workmanship; exclusions apply

Do not discard the factory base plate: The included mounting system depends on that original RZR component.

Front and rear placement examples for the UTVMA Polaris RZR bench seat

Verified vehicle fitment

RZR 900 Trail: 2015+ front or rear.
RZR 900, RZR S 900 and RZR 4 900: 2015–2026 front or rear.
RZR 1000 and RZR 4 1000: 2014–2026 front or rear, including applicable Turbo and Dynamix configurations.
RZR Turbo S: 2018–2026 front or rear.
Does not fit RZR Pro-platform models.

Fitment warning: “RZR” alone is not enough to confirm fitment. Match the full model, year and non-Pro platform, and verify that the factory base plate is present.

Choose both options before ordering

Bench colorSelect the upholstery accent that matches your machine: all black or the available blue, gray, red or orange accent.

Auto buckleAutomotive-style buckle options are offered in multiple harness colors for a familiar push-button release.

Off-road buckleThe black off-road buckle option uses a different latch style. Choose it only when that release format is preferred.

One harness option covers all threeThe selected harness configuration applies to the three harnesses supplied with the bench.

Close-up of a four-point harness installed with the UTVMA RZR bench seat

Installation and pre-ride checks

Confirm the factory RZR seat base plate is present before disassembly.
Mount the bench and harness anchors using the supplied hardware and instructions.
Route every harness away from sharp edges, hot components and moving parts.
Torque and recheck every seat mount and harness anchor before use.
Confirm each occupant fits the seating position and that the restraint lies correctly across the shoulders, chest and lap.
Follow the Polaris operator manual and never exceed the vehicle's occupant or payload limits.

Common questions before ordering

Can this bench be installed in the front or rear?

Yes, in the compatible models listed above. A two-seat RZR uses it in the front; a compatible four-seat RZR may use it in the front or rear.

Does this fit a RZR Pro XP, Pro R or Pro S?

No. The manufacturer specifically excludes Pro-platform models.

Is a console-delete kit included?

No—and one is not required. This bench is designed to fit over the console.

Do I need the stock seat base plate?

Yes. The original RZR base plate is required for installation and is not included.

Will the bench reduce legroom?

The manufacturer states that legroom remains the same as the stock setup.

How much higher does the bench sit?

Approximately two inches higher than the stock seat position.

How many harnesses are included?

Three four-point harnesses with sewn-in pads and chest buckles are included.

Is this automatically appropriate for a child?

No. Every occupant must fit the seat and restraint correctly. Follow the vehicle manufacturer's occupant requirements and all applicable safety guidance.

Confirm the base plate, model and year before ordering

Browse more UTV seats, shop UTV Mountain Accessories, or contact R1 Industries support if your placement or exact RZR platform is uncertain.

Reviews

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Fitment helpCall 801-899-2520 before ordering

Secure checkoutMultiple trusted payment options

Clear policiesShipping and returns

Professional installationAvailable in Pleasant Grove, Utah

Make sure it fits. Make sure it works.

Need help with this part?

R1 Industries can help confirm product fitment, compare options and arrange professional installation or repair.

Call product support801-899-2520 Request serviceGet a quote →

UTVMA Polaris RZR 900/1000 Front or Rear Bench Seat with Harnesses

UTVMA Polaris RZR 900/1000 Front or Rear Bench Seat with Harnesses

Description