R1 Industries Offroad
UTV LED Whip Lights
Shop 61 UTV LED Whip Lights products. Use the filters to narrow it down, and check the product page for exact fitment before ordering.
-
-
-
-
-
-
-
-
-
Sold out -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
About UTV LED Whip Lights
Shop LED whip lights for your UTV or side-by-side. Compare R1 pairs, single whips and lighting kits from the brands below. Start with the R1 comparison to choose your light profile, length and flag setup.
Compare R1 LED Whip Pairs
Pro Series RGBW: Choose Your Length
Choose 2-foot Fatty, 3-foot or 4-foot whips with a dedicated white LED channel, Bluetooth and RF remote control. Each pair includes quick-release mounts, controller, remote, wiring harness and rocker switch.
Flag setup: The 3-foot and 4-foot pairs include flags. The Pro Series 2-foot Fatty option does not include or accept flags.
Fatty LED Whip Pair: Wide Profile With Flags
This separate R1 Fatty pair has a 2½-inch diameter and measures approximately 27 inches from tip to base. Bluetooth and remote control, quick-release bases, flags and flag clips are included.
Different from the Pro Series 2-foot Fatty: This listing includes flags; the Pro Series 2-foot option does not accept them.
Both R1 lines list IP67 protection. See each product page for current pricing, kit contents and warranty details. On Pro Series pairs, spring mounts and 8-foot extensions are selectable extras.
Which Whip Length Should You Run?
| Whip length | Good for | What to know |
|---|---|---|
| 2-Foot Fatty pair | Technical trails and lower-clearance riding | A good choice when overhead clearance matters |
| 3-Foot pair | Trail, desert and mixed riding | A solid all-around starting point |
| 4-Foot pair | Dunes and open terrain | For riders who want a taller lighted whip |
The links above open the pair without optional spring mounts or extensions. Add either option on the product page if needed.
Not sure on size? See our LED whip light size guide.
Mounts, Wiring & Rock Lights
Already have your whips? Shop whip mounts and spring bases, or add UTV rock lights for underbody lighting.
Shop UTV Whip Lights by Machine
Most lighted whips use a universal 12-volt setup, but mounting points and wiring routes vary by machine. Browse Polaris RZR XP 1000 LED whip lights, Can-Am Maverick X3 LED whip lights or Can-Am Defender LED whip lights, then confirm your mounting location and wiring path before ordering.
What to Look For in LED Whips
- RGB or RGBW lighting
- Phone-app or remote-control options
- Quick-release mounting options
- Lengths that match your terrain and mounting height
- Single, pair and complete-kit configurations
Common Questions
What should I look for in UTV LED whip lights?
Check weather protection, the mounting base, wiring, controls, available replacement parts and warranty coverage. Whip length should match your mounting height and the terrain you normally ride.
Are LED whips and lighted whips the same thing?
Usually, yes. Both terms commonly describe a flexible illuminated whip mounted to a UTV, ATV or side-by-side.
Do I need spring mounts?
Not always. Spring mounts add movement at the base during rough riding. Whether you need them depends on whip height, terrain and mounting location.
What should I check before installing LED whip lights?
Check the mounting point, cage layout, battery location, wiring path and cable length before ordering. Product mounting requirements vary by setup.
Should I run one whip or a pair?
A pair is the most common symmetrical setup, and R1 Pro Series LED Light Whips are sold as a pair.
Need Help With Your Whip Setup?
Use the UTV LED Whip Resource Center for sizing, installation, mounting, RGBW information, troubleshooting and maintenance.
