2026+ Kawasaki Teryx H2 High-Flow Charge Tube Kit uses supplier-verified fitment and specifications for the applications listed below.

Fitment, Features & Contents

A must have for any Kawasaki Teryx H2, but especially when running higher RPM and boost with tuning and clutching

Replaces the factory silicone tubes for proven aluminum tubes that have less turbulent air and do not expand under higher boost pressure

Fits 2026+ Kawasaki Teryx H2 models

• A must have for any Kawasaki Teryx H2, but especially when running higher RPM and boost with tuning and clutching
• Replaces the factory silicone tubes for proven aluminum tubes that have less turbulent air and do not expand under higher boost pressure
• Charge tubes made at our own fabrication facility in the USA
• Aluminum vs. Silicone Charge Tubes: Aluminum charge tubes are stronger with less expansion under pressure and have less air turbulence. This results in flow better than silicone tubes when doing back to back tests. Charge tube expansion is increasing charge circuit volume taking away the transfer of air to your motor and resulting in slower spool up. Aluminum tubes also dissipate and reflect motor heat much better than silicone tubes. The main advantages of silicone tubes are less clamps (normally), cheaper to manufacture, and sometimes easier to install. We always use/manufacture aluminum tubes when possible as they have proven themselves to be better, and very reliable… especially with good T-Bolt clamps.
• See installation instructions HERE
• Part Number: 112-1077

Browse Aftermarket Assassins products and parts by model.