★★★★★5.0(X3 Riders)
94% Dust Separation • 2 Mount Positions • Ram Air Design • Whisper-Quiet Fan • 2.4A Max Draw
94% of Dust Gone Before It Reaches Your Filter. The S&B Roll Bar Separator for the Can-Am X3.
The Can-Am Maverick X3 is a dust magnet — especially in desert and dry trail conditions. The S&B Roll Bar Particle Separator mounts to your roll bar and uses a ram air design to pull in air and centrifugally separate 94% of dust and debris before it ever reaches your air filter. Two mounting positions let you dial in placement for your build. A whisper-quiet fan evacuates the separated particles. Fits all 2017+ X3 models.
What's Included
✓
Roll Bar Particle Separator
Ram air centrifugal design
✓
Whisper-Quiet Evacuation Fan
2.4A max draw
✓
Roll Bar Mounting Hardware
2 mount position options
✓
Full Wiring Kit & Instructions
Everything for install
Why X3 Riders Choose the S&B Roll Bar Separator
🌪️
94% dust separation — before it reaches your filter
Centrifugal separation removes 94% of dust and debris from the airstream before it ever contacts your air filter. Your filter stays cleaner, your engine stays protected.
💨
Ram air design — uses vehicle speed to pull air in
The roll bar mount position takes advantage of ram air pressure as you move. More speed = more airflow through the separator.
🔧
2 mounting positions for your build
Choose the mount position that works best for your cage setup. Hardware for both positions included.
🔇
Whisper-quiet fan — 2.4A max draw
The evacuation fan is nearly silent and draws minimal power. You won't notice it running.
📋
Fits all 2017+ Can-Am Maverick X3 models
X3, X3 Max, X RS, X MR, X DS — all trim levels from 2017 through 2024.
🛡️
Works upstream of your existing air filter
The separator is a pre-filter system. Your existing air filter stays in place — the separator just adds a layer of protection in front of it.
🏆
From S&B Filters — the filtration standard for UTVs
S&B's particle separators are among the most proven in the UTV market, trusted by desert racers and trail riders across the country.
Tracking
Sent When Shipped
Confirmation
Sent Immediately
Although rare, some delays may occur. We'll keep you updated every step of the way.
With Separator vs. Without
No Particle Separator
✕All dust hits your air filter directly
✕Filter clogs faster in dusty conditions
✕More frequent cleaning required
✕Higher engine contamination risk
✕Airflow drops as filter loads up
⚡ S&B Roll Bar Separator
✓94% of dust removed before the filter
✓Filter stays cleaner, longer
✓Fewer cleanings needed
✓Better engine protection
✓Ram air design boosts airflow at speed
What Riders Say
★★★★★
"My X3 eats dust on every ride. The S&B separator has made a massive difference — my filter barely needs cleaning now."
Brandon K. — Can-Am Maverick X3 Max
★★★★★
"Two mount positions is a nice touch. Fit perfectly on my cage without any issues. Fan is dead quiet."
Melissa T. — Can-Am Maverick X RS
★★★★★
"Best protection upgrade for the X3. You can literally see the dust collected in the separator after a desert run. It works."
Derek R. — Can-Am Maverick X3 X MR
Vehicle Fitment
Can-Am Maverick X3 (2017–2024)
All trim levels
Can-Am Maverick X3 Max (2017–2024)
All trim levels
Can-Am Maverick X RS, X MR, X DS (2017–2024)
All trim levels
Quick Answers
Does this replace my air filter?
No — it works upstream of your existing air filter as a pre-filter system. Your air filter stays in place.
How many mount positions are there?
Two. Hardware for both positions is included so you can choose the best fit for your cage setup.
Will this fit my 2023 X3?
Yes — fits all 2017 through 2024 Can-Am Maverick X3 models.
How fast does it ship?
In stock and ships fast. Tracking info sent as soon as your order is on its way.
Stop the Dust Before It Starts. The S&B Roll Bar Separator Is the Best Protection Upgrade for Your Can-Am X3.
In stock. Ships fast. 94% dust separation — fits all 2017+ Can-Am Maverick X3.
