★★★★★5.0(RZR Pro XP Riders)
94% Dust Separation • Whisper-Quiet Fan • 1.5hr Install • 2.7A Max Fan Draw • On-Demand Operation
Stop Feeding Your Engine Dust. The S&B Wheel Well Particle Separator Removes 94% Before It Gets In.
The Polaris RZR Pro XP pulls air from the wheel well — one of the dustiest spots on the machine. The S&B Wheel Well Particle Separator intercepts that air before it reaches your filter, removing 94% of dust and debris using centrifugal separation. A whisper-quiet on-demand fan evacuates the separated particles. Installs in about 1.5 hours. Fits 2020 and up RZR Pro XP.
What's Included
✓
Wheel Well Particle Separator
Centrifugal separation housing
✓
Whisper-Quiet Evacuation Fan
On-demand, 2.7A max draw
✓
Full Hardware & Wiring Kit
Everything for install
✓
Installation Instructions
~1.5hr install time
Why Pro XP Riders Choose the S&B Wheel Well Separator
🌪️
94% dust separation before it reaches your filter
Centrifugal separation spins dust and debris out of the airstream before it ever touches your air filter. Your filter stays cleaner, longer.
🔇
Whisper-quiet on-demand fan
The evacuation fan runs only when needed and draws just 2.7A max. You won't hear it, and it won't drain your battery.
⏱️
~1.5 hour install
Full hardware and wiring kit included. Most riders complete the install in about 1.5 hours with basic hand tools.
🛡️
Protects your engine and air filter simultaneously
Less dust reaching your filter means longer filter life, fewer cleanings, and better engine protection over the long haul.
📋
Designed specifically for the RZR Pro XP wheel well intake
Purpose-built for the 2020+ Pro XP air intake location. Not a universal fit — engineered for this exact application.
🏆
From S&B Filters — the filtration standard for UTVs
S&B builds filtration systems trusted by desert racers, trail riders, and hunters. Their particle separators are among the most proven in the UTV market.
🔧
Works with your existing air filter
The separator is a pre-filter system — it works upstream of your existing air filter, adding a layer of protection without replacing it.
Tracking
Sent When Shipped
Confirmation
Sent Immediately
Although rare, some delays may occur. We'll keep you updated every step of the way.
With Separator vs. Without
No Particle Separator
✕100% of wheel well dust hits your filter
✕Filter clogs faster in dusty conditions
✕More frequent filter cleaning required
✕Higher risk of engine contamination
✕Reduced airflow as filter loads up
⚡ S&B Wheel Well Separator
✓94% of dust removed before the filter
✓Filter stays cleaner, longer
✓Fewer cleanings needed
✓Better engine protection
✓Consistent airflow maintained
What Riders Say
★★★★★
"My filter used to be caked after every desert ride. With the S&B separator, it barely needs cleaning. Game changer."
Derek M. — Polaris RZR Pro XP
★★★★★
"Installed in about an hour and a half. Fan is dead quiet. Best protection upgrade I've done for my Pro XP."
Sarah K. — Polaris RZR Pro XP 4
★★★★★
"S&B quality is top notch. The 94% separation claim is real — you can see the dust collected in the separator after a ride."
Tom R. — Polaris RZR Pro XP
Vehicle Fitment
Polaris RZR Pro XP (2020+)
All trim levels
Polaris RZR Pro XP 4 (2020+)
All trim levels
Quick Answers
Does this replace my air filter?
No — it works upstream of your existing air filter as a pre-filter system. Your air filter stays in place.
How loud is the fan?
Whisper-quiet. The evacuation fan is designed to be nearly inaudible during normal operation.
How long does installation take?
About 1.5 hours with basic hand tools. Full hardware and wiring kit included.
How fast does it ship?
In stock and ships fast. Tracking info sent as soon as your order is on its way.
Stop the Dust Before It Starts. The S&B Wheel Well Separator Is the Best Protection Upgrade for Your RZR Pro XP.
In stock. Ships fast. 94% dust separation — fits Polaris RZR Pro XP 2020+.
