Standard / uncut
Choose this for sand, dirt and snow.
Keeps the original carcass material. This is the SDS choice for riders who want to use the tire across its three intended terrains.
Choose “No” under Comp Cut.
1 / 8
PACKARD SDS · SAND, DIRT & SNOW
For the listed size and preparation, select 33×15-15 standard / uncut or 33×13-15 standard / uncut. A comp cut is a separate preparation with its own price. If the narrower uncut tire is sold out, Check availability for the 33×13-15 uncut tire. Verify wheel and vehicle clearance before changing tire width. For a sand-only setup, see the 33×13-15 comp-cut option.
Dune trips. Dirt rides. Snow days. If your machine sees more than sand, the standard Packard SDS gives you a tire designed around all three. Its alternating curved tread and choice of widths let you put together a setup for the terrain you actually ride.
Start with where you ride, then choose your size and preparation. Want the SDS’s sand, dirt and snow versatility? Choose Standard / uncut. Building a lighter, dedicated sand setup? Consider Comp Cut—with the terrain limits and care that come with a thinner carcass.
You’re buying one Packard SDS tire in your selected size and preparation. Wheels, mounting and installation are not included. Order two for a pair or four for a full set after confirming your axle pairing and fitment.
THE SDS DIFFERENCE
The SDS uses alternating, angled tread lugs instead of the continuous full-width paddles found on a dedicated Sand Light rear tire. The standard SDS is the option to consider when sand, dirt and snow capability matters more to your build than a sand-only rear paddle.
Both listed sizes use a 15-inch wheel diameter. Choose the width that works with your wheels, clearance and drivetrain—then choose whether to keep the tire uncut or have it prepared for sand-only use.
For a dedicated dune machine, also compare Sand Light rear paddles around your power, vehicle weight and riding style.

CHOOSE YOUR PREPARATION
Choose this for sand, dirt and snow.
Keeps the original carcass material. This is the SDS choice for riders who want to use the tire across its three intended terrains.
Choose “No” under Comp Cut.
Choose this for a dedicated sand setup.
Material is removed from the carcass to reduce weight. The tradeoff is greater vulnerability to punctures and small air leaks.
Choose “Yes” under Comp Cut.
Comp-cut tires are for sand only. Do not use them on dirt, snow, rocks or wooded trails. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds.
CHOOSE YOUR SIZE
33-inch nominal diameter
13-inch nominal tire width
15-inch wheel diameter
The narrower of the two listed SDS options. Available uncut or comp cut.
33-inch nominal diameter
15-inch nominal tire width
15-inch wheel diameter
The wider listed SDS option. Available uncut or comp cut. Check the space your mounted tire needs.
The middle number is tire width, not required wheel width. A 33x15-15 tire does not mean you need a 15-inch-wide wheel. Confirm the approved rim-width range and actual mounted dimensions for your selected tire.
These sizes are not a blanket fitment guarantee for a particular UTV. Wheel width, offset and suspension changes affect the finished setup.
THE NUMBERS THAT MATTER
Packard lists a 33 lb standard tire weight. Actual weight can vary; confirm the figure for your selected size and preparation if weight is critical to your build.
Comp cutting reduces carcass material, but the finished weight depends on the preparation. Do not use the standard tire’s listed weight as a comp-cut specification.

BUILD THE COMPLETE SETUP
Before ordering, make sure the tires and wheels work together on your machine:
Already have wheels? Send us their diameter, width and offset along with your current tire sizes. Starting fresh? We can help you narrow down the combination before you buy.
REAL PEOPLE. SETUP HELP.
Tell the R1 team your year, make, model and trim; wheel specs; current tire sizes; suspension changes; and where you ride. We’ll help narrow down the size, preparation and wheel pairing so you know what you’re ordering.
Need tires mounted? Ask about mounting and installation at our Pleasant Grove shop when planning your setup.
2416 W 700 S, Suite 101, Pleasant Grove, UT 84062 · Monday–Friday, 9 AM–6 PM Mountain Time.
One tire. Your selection determines the size and whether it is uncut or comp cut. Wheels shown in the images are sold separately. Mounting and installation are not included.
Choose Standard / uncut by selecting “No” under Comp Cut. The comp-cut versions are for sand only.
A machine name and 15-inch wheel diameter alone do not confirm fitment. We need your exact model, wheel width and offset, suspension setup and current tires to help assess the pairing. Confirm approved rim width, mounted clearance and front/rear rolling circumference before ordering.
The thinner carcass is more vulnerable to punctures and small air leaks. Exposed threads may occur; replace tires with threads cut through. Packard’s listed preparation guidance calls for 8 oz of liquid starch per comp-cut tire. Confirm current preparation and inflation instructions for your exact configuration.
Availability and pricing depend on your selected variant. Third-party comp cutting can affect lead time; contact us before ordering for a time-sensitive trip. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds. For other purchases, review our return policy.
Shipping is calculated at checkout. For complete details, review our shipping and return policies.
PACKARD SDS · SAND, DIRT & SNOW
For the listed size and preparation, select 33×15-15 standard / uncut or 33×13-15 standard / uncut. A comp cut is a separate preparation with its own price. If the narrower uncut tire is sold out, Check availability for the 33×13-15 uncut tire. Verify wheel and vehicle clearance before changing tire width. For a sand-only setup, see the 33×13-15 comp-cut option.
Dune trips. Dirt rides. Snow days. If your machine sees more than sand, the standard Packard SDS gives you a tire designed around all three. Its alternating curved tread and choice of widths let you put together a setup for the terrain you actually ride.
Start with where you ride, then choose your size and preparation. Want the SDS’s sand, dirt and snow versatility? Choose Standard / uncut. Building a lighter, dedicated sand setup? Consider Comp Cut—with the terrain limits and care that come with a thinner carcass.
You’re buying one Packard SDS tire in your selected size and preparation. Wheels, mounting and installation are not included. Order two for a pair or four for a full set after confirming your axle pairing and fitment.
THE SDS DIFFERENCE
The SDS uses alternating, angled tread lugs instead of the continuous full-width paddles found on a dedicated Sand Light rear tire. The standard SDS is the option to consider when sand, dirt and snow capability matters more to your build than a sand-only rear paddle.
Both listed sizes use a 15-inch wheel diameter. Choose the width that works with your wheels, clearance and drivetrain—then choose whether to keep the tire uncut or have it prepared for sand-only use.
For a dedicated dune machine, also compare Sand Light rear paddles around your power, vehicle weight and riding style.

CHOOSE YOUR PREPARATION
Choose this for sand, dirt and snow.
Keeps the original carcass material. This is the SDS choice for riders who want to use the tire across its three intended terrains.
Choose “No” under Comp Cut.
Choose this for a dedicated sand setup.
Material is removed from the carcass to reduce weight. The tradeoff is greater vulnerability to punctures and small air leaks.
Choose “Yes” under Comp Cut.
Comp-cut tires are for sand only. Do not use them on dirt, snow, rocks or wooded trails. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds.
CHOOSE YOUR SIZE
33-inch nominal diameter
13-inch nominal tire width
15-inch wheel diameter
The narrower of the two listed SDS options. Available uncut or comp cut.
33-inch nominal diameter
15-inch nominal tire width
15-inch wheel diameter
The wider listed SDS option. Available uncut or comp cut. Check the space your mounted tire needs.
The middle number is tire width, not required wheel width. A 33x15-15 tire does not mean you need a 15-inch-wide wheel. Confirm the approved rim-width range and actual mounted dimensions for your selected tire.
These sizes are not a blanket fitment guarantee for a particular UTV. Wheel width, offset and suspension changes affect the finished setup.
THE NUMBERS THAT MATTER
Packard lists a 33 lb standard tire weight. Actual weight can vary; confirm the figure for your selected size and preparation if weight is critical to your build.
Comp cutting reduces carcass material, but the finished weight depends on the preparation. Do not use the standard tire’s listed weight as a comp-cut specification.

BUILD THE COMPLETE SETUP
Before ordering, make sure the tires and wheels work together on your machine:
Already have wheels? Send us their diameter, width and offset along with your current tire sizes. Starting fresh? We can help you narrow down the combination before you buy.
REAL PEOPLE. SETUP HELP.
Tell the R1 team your year, make, model and trim; wheel specs; current tire sizes; suspension changes; and where you ride. We’ll help narrow down the size, preparation and wheel pairing so you know what you’re ordering.
Need tires mounted? Ask about mounting and installation at our Pleasant Grove shop when planning your setup.
2416 W 700 S, Suite 101, Pleasant Grove, UT 84062 · Monday–Friday, 9 AM–6 PM Mountain Time.
One tire. Your selection determines the size and whether it is uncut or comp cut. Wheels shown in the images are sold separately. Mounting and installation are not included.
Choose Standard / uncut by selecting “No” under Comp Cut. The comp-cut versions are for sand only.
A machine name and 15-inch wheel diameter alone do not confirm fitment. We need your exact model, wheel width and offset, suspension setup and current tires to help assess the pairing. Confirm approved rim width, mounted clearance and front/rear rolling circumference before ordering.
The thinner carcass is more vulnerable to punctures and small air leaks. Exposed threads may occur; replace tires with threads cut through. Packard’s listed preparation guidance calls for 8 oz of liquid starch per comp-cut tire. Confirm current preparation and inflation instructions for your exact configuration.
Availability and pricing depend on your selected variant. Third-party comp cutting can affect lead time; contact us before ordering for a time-sensitive trip. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds. For other purchases, review our return policy.
Shipping details are shown at checkout. Review our shipping and return policies for complete information.
PACKARD SDS · SAND, DIRT & SNOW
For the listed size and preparation, select 33×15-15 standard / uncut or 33×13-15 standard / uncut. A comp cut is a separate preparation with its own price. If the narrower uncut tire is sold out, Check availability for the 33×13-15 uncut tire. Verify wheel and vehicle clearance before changing tire width. For a sand-only setup, see the 33×13-15 comp-cut option.
Dune trips. Dirt rides. Snow days. If your machine sees more than sand, the standard Packard SDS gives you a tire designed around all three. Its alternating curved tread and choice of widths let you put together a setup for the terrain you actually ride.
Start with where you ride, then choose your size and preparation. Want the SDS’s sand, dirt and snow versatility? Choose Standard / uncut. Building a lighter, dedicated sand setup? Consider Comp Cut—with the terrain limits and care that come with a thinner carcass.
You’re buying one Packard SDS tire in your selected size and preparation. Wheels, mounting and installation are not included. Order two for a pair or four for a full set after confirming your axle pairing and fitment.
THE SDS DIFFERENCE
The SDS uses alternating, angled tread lugs instead of the continuous full-width paddles found on a dedicated Sand Light rear tire. The standard SDS is the option to consider when sand, dirt and snow capability matters more to your build than a sand-only rear paddle.
Both listed sizes use a 15-inch wheel diameter. Choose the width that works with your wheels, clearance and drivetrain—then choose whether to keep the tire uncut or have it prepared for sand-only use.
For a dedicated dune machine, also compare Sand Light rear paddles around your power, vehicle weight and riding style.

CHOOSE YOUR PREPARATION
Choose this for sand, dirt and snow.
Keeps the original carcass material. This is the SDS choice for riders who want to use the tire across its three intended terrains.
Choose “No” under Comp Cut.
Choose this for a dedicated sand setup.
Material is removed from the carcass to reduce weight. The tradeoff is greater vulnerability to punctures and small air leaks.
Choose “Yes” under Comp Cut.
Comp-cut tires are for sand only. Do not use them on dirt, snow, rocks or wooded trails. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds.
CHOOSE YOUR SIZE
33-inch nominal diameter
13-inch nominal tire width
15-inch wheel diameter
The narrower of the two listed SDS options. Available uncut or comp cut.
33-inch nominal diameter
15-inch nominal tire width
15-inch wheel diameter
The wider listed SDS option. Available uncut or comp cut. Check the space your mounted tire needs.
The middle number is tire width, not required wheel width. A 33x15-15 tire does not mean you need a 15-inch-wide wheel. Confirm the approved rim-width range and actual mounted dimensions for your selected tire.
These sizes are not a blanket fitment guarantee for a particular UTV. Wheel width, offset and suspension changes affect the finished setup.
THE NUMBERS THAT MATTER
Packard lists a 33 lb standard tire weight. Actual weight can vary; confirm the figure for your selected size and preparation if weight is critical to your build.
Comp cutting reduces carcass material, but the finished weight depends on the preparation. Do not use the standard tire’s listed weight as a comp-cut specification.

BUILD THE COMPLETE SETUP
Before ordering, make sure the tires and wheels work together on your machine:
Already have wheels? Send us their diameter, width and offset along with your current tire sizes. Starting fresh? We can help you narrow down the combination before you buy.
REAL PEOPLE. SETUP HELP.
Tell the R1 team your year, make, model and trim; wheel specs; current tire sizes; suspension changes; and where you ride. We’ll help narrow down the size, preparation and wheel pairing so you know what you’re ordering.
Need tires mounted? Ask about mounting and installation at our Pleasant Grove shop when planning your setup.
2416 W 700 S, Suite 101, Pleasant Grove, UT 84062 · Monday–Friday, 9 AM–6 PM Mountain Time.
One tire. Your selection determines the size and whether it is uncut or comp cut. Wheels shown in the images are sold separately. Mounting and installation are not included.
Choose Standard / uncut by selecting “No” under Comp Cut. The comp-cut versions are for sand only.
A machine name and 15-inch wheel diameter alone do not confirm fitment. We need your exact model, wheel width and offset, suspension setup and current tires to help assess the pairing. Confirm approved rim width, mounted clearance and front/rear rolling circumference before ordering.
The thinner carcass is more vulnerable to punctures and small air leaks. Exposed threads may occur; replace tires with threads cut through. Packard’s listed preparation guidance calls for 8 oz of liquid starch per comp-cut tire. Confirm current preparation and inflation instructions for your exact configuration.
Availability and pricing depend on your selected variant. Third-party comp cutting can affect lead time; contact us before ordering for a time-sensitive trip. Packard states that altered/comp-cut tires have no warranty, exchanges or refunds. For other purchases, review our return policy.
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
R1 Industries • Pleasant Grove repair shop
Planning new tires or wheels? Our Pleasant Grove team can discuss supported installation, fitment and brake or steering concerns before you bring your machine in.
2416 W 700 S, Suite 101, Pleasant Grove, UT 84062. Serving Utah County.
Make sure it fits. Make sure it works.
R1 Industries can help confirm product fitment, compare options and arrange professional installation or repair.